Experimental comparison of cycle modifications and ejector control methods using variable geometry and CO2 pump in a multi-evaporator transcritical CO2 refrigeration system

To reduce the direct global warming impact of refrigerants in HVAC&R applications, low-global warming potential (GWP) refrigerants, including natural refrigerants, have been extensively investigated as alternatives to hydrofluorocarbon (HFC) refrigerants. Among the natural refrigerants, Carbon Dioxide (CO2) offers several advantages, such as excellent transport and thermo-physical properties, being neither toxic nor flammable, and having a low price and high availability around the world. However, the high critical pressure and low critical temperature of CO2 often lead to transcritical operation, resulting in lower efficiency due to the additional compressor power necessary to achieve transcritical operation relative to subcritical HFC cycles. Therefore, a number of cycle modifications are used to enhance the coefficient of performance (COP) of transcritical CO2 cycles to meet or surpass those of HFC cycles. This paper provides a systematic experimental investigation of four such cycle architectures by employing the same multi-stage, two-evaporator CO2 refrigeration cycle test stand, 3 of these configurations in transcritical and 1 in subcritical conditions. The four cycles architectures included intercooling, open economization, an internal heat exchanger and two different ejector control approaches. Specifically, a variable-diameter motive nozzle and a variable-speed liquid CO2 pump located directly upstream of the ejector motive nozzle inlet were analyzed. Based on the experimental data, the maximum COP improvements are 4.64 % and 9.47 % when the ejector and the internal heat exchanger are used, respectively. The CO2 pump, once successfully stabilized, can control the ejector, increase its efficiency by up to 15 % and increase the cooling capacity to a maximum of 6.2 %. Nevertheless, a reduction in COP is measured when the pump is in use; however, unlike the other three different configurations, it was only analyzed under subcritical conditions.

Publication Details

Journal
Purdue e-Pubs (Purdue University System)
Published
2025-01-01
Primary Topic
Refrigeration and Air Conditioning Technologies
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Experimental comparison of cycle modifications and ejector control methods using variable geometry and CO2 pump in a multi-evaporator transcritical CO2 refrigeration system

Purdue e-Pubs (Purdue University System)
Refrigeration and Air Conditioning Technologies
article

Experimental comparison of cycle modifications and ejector control methods using variable geometry and CO2 pump in a multi-evaporator transcritical CO2 refrigeration system

article en

Abstract

To reduce the direct global warming impact of refrigerants in HVAC&R applications, low-global warming potential (GWP) refrigerants, including natural refrigerants, have been extensively investigated as alternatives to hydrofluorocarbon (HFC) refrigerants. Among the natural refrigerants, Carbon Dioxide (CO2) offers several advantages, such as excellent transport and thermo-physical properties, being neither toxic nor flammable, and having a low price and high availability around the world. However, the high critical pressure and low critical temperature of CO2 often lead to transcritical operation, resulting in lower efficiency due to the additional compressor power necessary to achieve transcritical operation relative to subcritical HFC cycles. Therefore, a number of cycle modifications are used to enhance the coefficient of performance (COP) of transcritical CO2 cycles to meet or surpass those of HFC cycles. This paper provides a systematic experimental investigation of four such cycle architectures by employing the same multi-stage, two-evaporator CO2 refrigeration cycle test stand, 3 of these configurations in transcritical and 1 in subcritical conditions. The four cycles architectures included intercooling, open economization, an internal heat exchanger and two different ejector control approaches. Specifically, a variable-diameter motive nozzle and a variable-speed liquid CO2 pump located directly upstream of the ejector motive nozzle inlet were analyzed. Based on the experimental data, the maximum COP improvements are 4.64 % and 9.47 % when the ejector and the internal heat exchanger are used, respectively. The CO2 pump, once successfully stabilized, can control the ejector, increase its efficiency by up to 15 % and increase the cooling capacity to a maximum of 6.2 %. Nevertheless, a reduction in COP is measured when the pump is in use; however, unlike the other three different configurations, it was only analyzed under subcritical conditions.

Purdue e-Pubs (Purdue University System)
Affordable and clean energy
Openalex Percentile: Top 53%
Refrigeration and Air Conditioning Technologies
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Experimental comparison of cycle modifications and ejector control methods using variable geometry and CO2 pump in a multi-evaporator transcritical CO2 refrigeration system · Purdue e-Pubs (Purdue University System) (2025) | TGRS Research Map | TGRS