РОЗПОДІЛ ЗУСИЛЛЯ РІЗАННЯ ПРИ ТАНГЕНЦІАЛЬНІЙ ТОКАРНІЙ ОБРОБЦІ ЛЕГОВАНОЇ СТАЛІ 42CRMO4: ВПЛИВ ВИСОКИХ ШВИДКОСТЕЙ РІЗАННЯ ТА ВЕЛИКИХ ЗНАЧЕНЬ ПОДАЧІ

This study investigates the cutting force distribution during tangential turning of 42CrMo4 alloy steel under high cutting speeds and high feed rates. The experiments were conducted by varying cutting speed (200 and 250 m/min), feed rate (0.3 and 0.8 mm/rev), and depth of cut (0.1 and 0.2 mm). The major cutting force, feed directional force, and thrust force components were measured, and their maximum values and relative ratios were analysed. The results indicate that both cutting speed and feed rate have a significant influence on the magnitude and distribution of the cutting force components. Higher cutting speeds generally led to a reduction in cutting force values, while increased feed rates resulted in higher force magnitudes and altered force ratios. The obtained data contribute to a better understanding of the cutting mechanics in tangential turning, supporting process optimization and the selection of appropriate cutting parameters for improved machining performance.