Довготривала міцність бітуму при склуванні

Abstract. Problem. Long-term strength and durability are the most important characteristics of any structural material. Since these mechanical properties depend on their manufacturing technology and composition, there is a need to conduct research on road construction materials for long-term strength and durability. There are many studies on the long-term strength of various solids, including asphalt concrete, but there is no data on the long-term strength of bitumen, which is in a glass transition state at low temperatures. The main goal. The aim of the work was to experimentally determine the long-term strength of bitumen at low operating temperatures. It was also necessary to establish how the structural type of bitumen and its filling with various mineral powders affect long-term strength. Methodology. To determine the long-term strength of bitumen, the Heppler consistometer, which is often used in the thermomechanical analysis of polymers, was adapted. To study the influence of the structural type of bitumen on its long-term strength during glass transition, bitumens with the same penetration and close to the first (gel), second (sol) and third (sol-gel) structural types were obtained. Results. The nature of the dependences of the time to destruction from the applied load at a constant bitumen temperature differs from the similar dependences of solid single-phase materials. During the transition of bitumen to a glassy state, static destruction depends on the plasticity of the material, the greater it is, the lower the temperature stress due to the irregular complex structure of the material. Bitumens of the first structural type (gel) show better relaxation properties at low temperatures compared to bitumens of the second structural type (sol). As a result, their long-term durability is higher. Filling bitumen with mineral powders of different origins changes the structure of the binder, it becomes more ordered. The result is an increase in strength and a decrease in temperature stress of bitumen during glass transition. Originality. New experimental data on the long-term strength of bitumen at low operating temperatures were obtained. It is shown that they are described by the formula of S.M. Zhurkov. Practical value. It is possible to improve the low-temperature properties of asphalt concrete by using bitumen of the first type with quartz mineral powder

Publication Details

Journal
The Scientific Issues of Ternopil Volodymyr Hnatiuk National Pedagogical University Series pedagogy
Published
2024-09-19
Primary Topic
Asphalt Pavement Performance Evaluation
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Довготривала міцність бітуму при склуванні

The Scientific Issues of Ternopil Volodymyr Hnatiuk National Pedagogical University Series pedagogy
Asphalt Pavement Performance Evaluation
article

Довготривала міцність бітуму при склуванні

article en

Abstract

Abstract. Problem. Long-term strength and durability are the most important characteristics of any structural material. Since these mechanical properties depend on their manufacturing technology and composition, there is a need to conduct research on road construction materials for long-term strength and durability. There are many studies on the long-term strength of various solids, including asphalt concrete, but there is no data on the long-term strength of bitumen, which is in a glass transition state at low temperatures. The main goal. The aim of the work was to experimentally determine the long-term strength of bitumen at low operating temperatures. It was also necessary to establish how the structural type of bitumen and its filling with various mineral powders affect long-term strength. Methodology. To determine the long-term strength of bitumen, the Heppler consistometer, which is often used in the thermomechanical analysis of polymers, was adapted. To study the influence of the structural type of bitumen on its long-term strength during glass transition, bitumens with the same penetration and close to the first (gel), second (sol) and third (sol-gel) structural types were obtained. Results. The nature of the dependences of the time to destruction from the applied load at a constant bitumen temperature differs from the similar dependences of solid single-phase materials. During the transition of bitumen to a glassy state, static destruction depends on the plasticity of the material, the greater it is, the lower the temperature stress due to the irregular complex structure of the material. Bitumens of the first structural type (gel) show better relaxation properties at low temperatures compared to bitumens of the second structural type (sol). As a result, their long-term durability is higher. Filling bitumen with mineral powders of different origins changes the structure of the binder, it becomes more ordered. The result is an increase in strength and a decrease in temperature stress of bitumen during glass transition. Originality. New experimental data on the long-term strength of bitumen at low operating temperatures were obtained. It is shown that they are described by the formula of S.M. Zhurkov. Practical value. It is possible to improve the low-temperature properties of asphalt concrete by using bitumen of the first type with quartz mineral powder

The Scientific Issues of Ternopil Volodymyr Hnatiuk National Pedagogical University Series pedagogy
Sustainable cities and communities
Openalex Percentile: Top 56%
Asphalt Pavement Performance Evaluation
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.