Bensonella fracta Gojsina, Hunyadi & Pall-Gergely 2025, sp. nov.

Bensonella fracta Gojšina, Hunyadi & Páll-Gergely sp. nov. Figs 101 B, 103, 104, 107 Type material. Holotype. Thailand • 1 shell (SH: 2.08 mm; SW: 2.09 mm); Loei Province, Nong Hin district, 20.3 km southwest from centre of Nong Hin towards Pha Wai, left side of road no. 3029; 17°2.471'N, 101°43.655'E; 705 m a. s. l.; 28 Feb. 2023; A. Hunyadi & J. U. Otani leg.; CUMZ 14448. Paratypes. Thailand • 5 shells; same data as for holotype; coll. HA. Type locality. Thailand, Loei Province, Nong Hin district, 20.3 km southwest from centre of Nong Hin, Pha Wai; left side of road no. 3029; 17°2.471'N, 101°43.655'E; 705 m a. s. l. Diagnosis. Bensonella species with spirally striated teleoconch and strongly convex whorls separated by a deep suture. Last whorl narrow, slightly detached, rounded. Apertural barriers usually 7. Upper palatal plica bipartite, consisting of anterior and posterior bulge. Description. Shell conical, light yellowish-brownish, opaque. It is consisting of ~ 5 regularly increasing, strongly convex whorls separated by a deeply impressed suture. Protoconch finely pitted, showing a spiralling pattern (which is stronger terminally) and consisting of ~ 1.5 whorls, coloured as the rest of the shell. Teleoconch with sculpture consisting of fine, raised, and innumerable spiral striae which are occasionally crossed by much weaker radial growth lines (rarely present as strong white streaks). The sculpture of the teleoconch gets more prominent as the whorls are increasing, thus being most noticeable on the last two whorls. Last whorl relatively narrow (low), slightly detached from the penultimate, and slightly ascending near the aperture (~ 5–10 ° compared to the shell axis). It is completely rounded and strongly convex. Peristome the same colour as the rest of the shell, strongly expanded with finely pitted surface, not reflected. Aperture equipped with five main barriers (angular, parietal, upper palatal, lower palatal, and columellar). Angular lamella short and thick, directed towards the lower palatal plica. Parietal lamella longer than the angular, leaned towards the upper palatal plica. Upper palatal plica usually bipartite, consisting of anterior and posterior bulge. Anterior bulge is closer to the peristome, smaller and lower. Posterior bulge is longer, higher, and stronger, positioned behind the anterior (deeper in the aperture). Origin of the anterior bulge is not known but it may be homologous with the palatal tubercle usually found in many typical Bensonella species. Columellar lamella developed to the similar extent as the palatal plicae. In front of the columellar lamella, there is sometimes a small swelling on the peristome. Apart from these main barriers, there is usually an additional smaller basal plica and one even smaller knob-like lamella in the columello-parietal embayment. Only the angular lamella and anterior bulge of the upper palatal plica are reaching t peristome. Surface of all apertural barriers is finely granulated. Sinulus small, well separated from the rest of the shell due to the closely situated angular lamella and upper palatal plica. Umbilicus moderately wide (1 / 5–1 / 6 of the shell width), showing only the penultimate whorl. Umbilical groove absent. Differential diagnosis. Bensonella fracta sp. nov. is much larger than all other representatives of Bensonella wangviangensis group. See also under B. wangviangensis. Measurements (in mm, n = 4). SW 1 = 2.09–2.18; SW 2 = 1.31–1.48; SH = 1.9–2.08; AH = 0.81–1.1; AW = 0.89–1.23. Etymology. The first examined specimen of this species had a crack on the apical whorls, which gave the specific epithet fracta. Distribution. This species is known only from the type locality. Remarks. This species is not a typical representative of this group since the angular lamella is quite small and not almost enclosing the sinulus. However, it is placed here because of the high morphological similarity with mostly B. wangviangensis. A tubercle-like swelling in the columellar-parietal embayment was found to be missing in one specimen. Otherwise, this species does not seem to be much variable regarding apertural barriers.

Institutions

Publication Details

Journal
Zenodo (CERN European Organization for Nuclear Research)
Published
2025-04-23
DOI
https://doi.org/10.5281/zenodo.15270771
Primary Topic
Diatoms and Algae Research
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Bensonella fracta Gojsina, Hunyadi & Pall-Gergely 2025, sp. nov.

Zenodo (CERN European Organization for Nuclear Research)
Diatoms and Algae Research
article

Bensonella fracta Gojsina, Hunyadi & Pall-Gergely 2025, sp. nov.

article en

Abstract

Bensonella fracta Gojšina, Hunyadi & Páll-Gergely sp. nov. Figs 101 B, 103, 104, 107 Type material. Holotype. Thailand • 1 shell (SH: 2.08 mm; SW: 2.09 mm); Loei Province, Nong Hin district, 20.3 km southwest from centre of Nong Hin towards Pha Wai, left side of road no. 3029; 17°2.471'N, 101°43.655'E; 705 m a. s. l.; 28 Feb. 2023; A. Hunyadi & J. U. Otani leg.; CUMZ 14448. Paratypes. Thailand • 5 shells; same data as for holotype; coll. HA. Type locality. Thailand, Loei Province, Nong Hin district, 20.3 km southwest from centre of Nong Hin, Pha Wai; left side of road no. 3029; 17°2.471'N, 101°43.655'E; 705 m a. s. l. Diagnosis. Bensonella species with spirally striated teleoconch and strongly convex whorls separated by a deep suture. Last whorl narrow, slightly detached, rounded. Apertural barriers usually 7. Upper palatal plica bipartite, consisting of anterior and posterior bulge. Description. Shell conical, light yellowish-brownish, opaque. It is consisting of ~ 5 regularly increasing, strongly convex whorls separated by a deeply impressed suture. Protoconch finely pitted, showing a spiralling pattern (which is stronger terminally) and consisting of ~ 1.5 whorls, coloured as the rest of the shell. Teleoconch with sculpture consisting of fine, raised, and innumerable spiral striae which are occasionally crossed by much weaker radial growth lines (rarely present as strong white streaks). The sculpture of the teleoconch gets more prominent as the whorls are increasing, thus being most noticeable on the last two whorls. Last whorl relatively narrow (low), slightly detached from the penultimate, and slightly ascending near the aperture (~ 5–10 ° compared to the shell axis). It is completely rounded and strongly convex. Peristome the same colour as the rest of the shell, strongly expanded with finely pitted surface, not reflected. Aperture equipped with five main barriers (angular, parietal, upper palatal, lower palatal, and columellar). Angular lamella short and thick, directed towards the lower palatal plica. Parietal lamella longer than the angular, leaned towards the upper palatal plica. Upper palatal plica usually bipartite, consisting of anterior and posterior bulge. Anterior bulge is closer to the peristome, smaller and lower. Posterior bulge is longer, higher, and stronger, positioned behind the anterior (deeper in the aperture). Origin of the anterior bulge is not known but it may be homologous with the palatal tubercle usually found in many typical Bensonella species. Columellar lamella developed to the similar extent as the palatal plicae. In front of the columellar lamella, there is sometimes a small swelling on the peristome. Apart from these main barriers, there is usually an additional smaller basal plica and one even smaller knob-like lamella in the columello-parietal embayment. Only the angular lamella and anterior bulge of the upper palatal plica are reaching t peristome. Surface of all apertural barriers is finely granulated. Sinulus small, well separated from the rest of the shell due to the closely situated angular lamella and upper palatal plica. Umbilicus moderately wide (1 / 5–1 / 6 of the shell width), showing only the penultimate whorl. Umbilical groove absent. Differential diagnosis. Bensonella fracta sp. nov. is much larger than all other representatives of Bensonella wangviangensis group. See also under B. wangviangensis. Measurements (in mm, n = 4). SW 1 = 2.09–2.18; SW 2 = 1.31–1.48; SH = 1.9–2.08; AH = 0.81–1.1; AW = 0.89–1.23. Etymology. The first examined specimen of this species had a crack on the apical whorls, which gave the specific epithet fracta. Distribution. This species is known only from the type locality. Remarks. This species is not a typical representative of this group since the angular lamella is quite small and not almost enclosing the sinulus. However, it is placed here because of the high morphological similarity with mostly B. wangviangensis. A tubercle-like swelling in the columellar-parietal embayment was found to be missing in one specimen. Otherwise, this species does not seem to be much variable regarding apertural barriers.

Zenodo (CERN European Organization for Nuclear Research)
Florida Museum of Natural History (US), Chulalongkorn University (TH), University of Florida (US), University of Belgrade (RS), Institute of Materials and Environmental Chemistry (HU), Slovak Environmental Agency (SK), Széchenyi István University (HU)
Life in Land
Openalex Percentile: Top 58%
Diatoms and Algae Research
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.