Mechanical properties and biocompatibility of bioresorbable ceramic bone implants printed by lithography-based manufacturing

Critical-sized bone defects often require surgical intervention due to their limited healing capacity. The use of autologous bone grafts for the treatment of these defects is still considered as gold standard in surgery. However, these grafts reveal different limitations underscoring the need for synthetic alternatives. Lithography-based ceramic manufacturing (LCM) offers the potential to fabricate patient-specific scaffolds with an optimized architecture that facilitates mechanical strength as well as an effective integration in terms of vascularization and the ingrowth of new bone from peri-implant tissue. Bioresorbable ceramics, such as hydroxyapatite (HA) and tricalcium phosphate (TCP) are considered to promote bone regeneration by mimicking native bone minerals, while degrading during new tissue formation. The aim of this study is to compare LCM printed bone constructs based on different materials (HA 480, TCP 300, Lithabone, Lithoz) and internal scaffold architectures, evaluating their mechanical properties and the cellular response of human mesenchymal stem cells (hMSCs). Scaffolds with three distinct lattice structures (NaCl, Gyroid, and Voronoi) and two pore sizes (1.6 mm and 1.16 mm) were printed via LCM (CeraFab, Lithoz; Vienna, Austria). The scaffolds were designed as cylinders (9 mm diameter, 3 mm height) with a uniform porosity of 50%. Mechanical compression testing (Zwick/Roell, Ulm, Germany) was conducted at a compression speed of 2 mm/min with a preload of 5 N. For biocompatibility testing of the scaffolds, hMSCs were seeded at a density of 2 × 10? cells/scaffold and cultured for 14 days followed by analyzing the cell response using different methods. Scaffolds with a NaCl structure and a pore size of 1.6 mm exhibited the highest compressive strength independent from the material and in agreement with the increased wall thickness of this scaffold design. Scanning electron microscopy (SEM) revealed material-dependent differences in surface microstructure of the scaffolds. HA480 exhibited a slightly smoother surface structure compared to TCP300, which may influence cellular adhesion along with other material related factors, such as the calcium phosphate crystalline structure. After 14 days, viability staining confirmed a high cellular viability and confluent colonization of all scaffold types by hMSCs. First results from DNA quantification to quantify the cell numbers on the different scaffold types indicated comparable cell numbers after 14 days. Osteogenic differentiation was assessed via staining for calcium deposition (OsteoImageTM) and PCR analysis of osteogenic markers (collagen type 1, alkaline phosphatase and osteocalcin). Initial results for calcium deposition indicated early signs of cell-mediated mineralization in TCP scaffolds seeded with hMSCs compared to cell-free controls. First PCR results indicate elevated osteocalcin expression in hMSCs cultured on HA scaffolds, suggesting a material-dependent enhancement of osteogenic differentiation. However, further experiments are necessary and might provide a more comprehensive understanding of material or design-related cellular responses.