OxidativeFunctionalization of Solvent-PretreatedPolyethylene by Ozone

Recently, there has been much interest in editing polymers to either endow them with improved properties or facilitate their deconstruction post-use. Such editing often requires the addition of functional groups, which can be especially challenging in the case of highly crystalline and recalcitrant polymers. Herein, we introduce a relatively simple dual-step technique for functionalizing high-density polyethylene (HDPE) using ozone. The method involves first treating the polymer in either supercritical carbon dioxide or paraffinic solvents such as isobutane or <i>n</i>-hexane at 110–120 °C to enhance ozone’s accessibility to the C–H bonds. This step is then followed by exposing the pretreated polymer to ozone either in a gaseous form or dissolved in liquid carbon dioxide at ambient temperature. Nitrogen sorption results and scanning electron micrographs confirmed increased porosity in the solvent-pretreated HDPE samples. Infrared and NMR spectroscopic analyses reveal the formation of carbonyl groups in the pretreated polymer samples upon ozonation. Further, high-temperature GPC analyses indicate that ozonation reduced the molecular weights of the pretreated HDPE samples, suggesting that ozone also induces C–C scission. This method uses benign reagents to induce porosity in the polymer and its functionalization. Our results demonstrate the need to improve ozone utilization to maximize resource efficiency.