Towards an active semi-anechoic room: simulations and first measurements

Semi-anechoic rooms are used for the acoustic characterisation of noise sources. They involve heavy infrastructures and thick absorbent lining. The aim of this work is to demonstrate a less expensive alternative by complementing a thin passive coating with an active technology. Previous work has achieved the active reduction of the pressure scattered by the reflective wall of a semi-anechoic room, in the 80–200 Hz frequency band. This work validated an innovative approach allowing to control the scattered pressure throughout the measurement volume, using a setup located over its periphery. This paper extends a previous presentation at Forum Acusticum dealing with the active control of the low-frequency reflections on the walls and ceiling of a semi-anechoic room [Pinhède et al., Forum Acusticum 2023, Torino, Italy, 11–15 September, 2023, <ns0:ext-link ext-link-type="uri" ns4:href="https://doi.org/10.61782/fa.2023.0399">https://doi.org/10.61782/fa.2023.0399</ns0:ext-link>]. We describe the design principles and the 2D semi-analytical and 3D finite element simulations of the control system that help optimise parameters such as the transducers number and locations. A full-scale demonstrator has been built to validate the control strategy. Acoustics measurements, which have been used to characterise the room acoustics and to update the simulation parameters are also presented and compared to an updated numerical model.