Utilizationof a Solid Waste Inhibitor for the CleanFlotation Enrichment of Phosphate Ores

The accumulation of phosphogypsum (PG) in the phosphorus chemical industry poses significant environmental challenges. Therefore, developing a harmless utilization method is crucial for alleviating these burdens and promoting sustainable industry practices. In this study, PG was used as a flotation inhibitor, enabling the flotation separation of apatite and dolomite based on the main components and dissolution behavior of PG. A microflotation study revealed that 0.875 g/L PG selectively inhibited dolomite when the sodium oleate (NaOL) concentration was 1.5 × 10<sup>–4</sup> mol/L, reducing dolomite recovery 76% to 10% at pH in the range of 7–11. Conversely, apatite recovery remained above 90% at pH 7–9 and was only slightly inhibited at pH in the range of pH 9–11. When CaSO<sub>4</sub>·2H<sub>2</sub>O and CaHPO<sub>4</sub>·2H<sub>2</sub>O were added as flotation inhibitors, they also inhibited dolomite, though their effects were weaker than PG. Measurements of contact angles, zeta potentials, and adsorption capacities indicated that PG enhanced the hydrophilicity of dolomite, hindering NaOL adsorption thereon, while it had little effect on the floatability of apatite. Atomic force and scanning electron microscopy revealed selective PG was adsorbed on the dolomite surface, altering its properties, while PG was weakly adsorbed on the apatite surface and had minimal impact on its properties. The solution chemical composition and microthermal results showed that CaSO<sub>4</sub> and CaHPO<sub>4</sub> are the effective components of PG inhibition. X-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectrometry confirmed that CaSO<sub>4</sub> and CaHPO<sub>4</sub> in PG were selectively adsorbed at Ca and Mg ion sites on the dolomite surface. Molecular dynamics simulations showed that CaSO<sub>4</sub> interacts with the surface of dolomite, and CaHPO<sub>4</sub> can promote the adsorption of CaSO<sub>4</sub> on the surface of dolomite. Utilizing PG as a flotation inhibitor provides a novel approach for the environmentally safe use of PG resources.

Publication Details

Journal
Figshare
Published
2025-01-28
DOI
https://doi.org/10.1021/acs.langmuir.5c00081.s001
Primary Topic
Physics and Engineering Research Articles
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Utilizationof a Solid Waste Inhibitor for the CleanFlotation Enrichment of Phosphate Ores

Figshare
Physics and Engineering Research Articles
article

Utilizationof a Solid Waste Inhibitor for the CleanFlotation Enrichment of Phosphate Ores

article en

Abstract

The accumulation of phosphogypsum (PG) in the phosphorus chemical industry poses significant environmental challenges. Therefore, developing a harmless utilization method is crucial for alleviating these burdens and promoting sustainable industry practices. In this study, PG was used as a flotation inhibitor, enabling the flotation separation of apatite and dolomite based on the main components and dissolution behavior of PG. A microflotation study revealed that 0.875 g/L PG selectively inhibited dolomite when the sodium oleate (NaOL) concentration was 1.5 × 10<sup>–4</sup> mol/L, reducing dolomite recovery 76% to 10% at pH in the range of 7–11. Conversely, apatite recovery remained above 90% at pH 7–9 and was only slightly inhibited at pH in the range of pH 9–11. When CaSO<sub>4</sub>·2H<sub>2</sub>O and CaHPO<sub>4</sub>·2H<sub>2</sub>O were added as flotation inhibitors, they also inhibited dolomite, though their effects were weaker than PG. Measurements of contact angles, zeta potentials, and adsorption capacities indicated that PG enhanced the hydrophilicity of dolomite, hindering NaOL adsorption thereon, while it had little effect on the floatability of apatite. Atomic force and scanning electron microscopy revealed selective PG was adsorbed on the dolomite surface, altering its properties, while PG was weakly adsorbed on the apatite surface and had minimal impact on its properties. The solution chemical composition and microthermal results showed that CaSO<sub>4</sub> and CaHPO<sub>4</sub> are the effective components of PG inhibition. X-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectrometry confirmed that CaSO<sub>4</sub> and CaHPO<sub>4</sub> in PG were selectively adsorbed at Ca and Mg ion sites on the dolomite surface. Molecular dynamics simulations showed that CaSO<sub>4</sub> interacts with the surface of dolomite, and CaHPO<sub>4</sub> can promote the adsorption of CaSO<sub>4</sub> on the surface of dolomite. Utilizing PG as a flotation inhibitor provides a novel approach for the environmentally safe use of PG resources.

Figshare
Industry, innovation and infrastructure
Openalex Percentile: Top 51%
Physics and Engineering Research Articles
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Utilizationof a Solid Waste Inhibitor for the CleanFlotation Enrichment of Phosphate Ores · Figshare (2025) | TGRS Research Map | TGRS