Synthesis and Characterizationof Zeolite A from IndustrialFly Ash as a Green, Cost-Effective Cd<sup>2+</sup> and Pb<sup>2+</sup> Adsorbent for Wastewater Applications

According to the large amount of fly ash waste generated from the use of lignite coal as the primary fuel for electricity generation in the Mae Moh district of Lampang province, Thailand, efforts have been made in waste management to reduce and repurpose this industrial byproduct. In this study, lignite coal fly ash was used to synthesize zeolite A adsorbents for the treatment of wastewater contaminated with heavy metals. Characterization of the synthesized zeolite using XRD, XRF, BET, and SEM methods confirmed that it is zeolite A, with a calculated Si/Al molar ratio of approximately 1.19, closely matching the theoretical ratio of zeolite A. This zeolite A exhibited a high crystalline phase and a mesoporous structure, having a specific surface area of 37.10 m<sup>2</sup>/g and a total pore volume of 0.06 cm<sup>3</sup>/g. The performance of this zeolite A was evaluated for the adsorption of Cd<sup>2+</sup> and Pb<sup>2+</sup> in prepared solutions. The removal efficiencies of zeolite A for Cd<sup>2+</sup> and Pb<sup>2+</sup> were 99.65% ± 0.1% and 93.90% ± 0.5%, with maximum adsorption capacities of 17.3 ± 0.6 and 8.8 ± 0.1 mg/g, respectively. Additionally, zeolite A demonstrated reusability for the adsorption of Cd<sup>2+</sup> and Pb<sup>2+</sup>, maintaining a removal efficiency of 80.52% ± 0.1% for Cd<sup>2+</sup> over five reuse cycles, and 96.83% ± 0.7% for Pb<sup>2+</sup> over one reuse cycle. The adsorption of Cd<sup>2+</sup> and Pb<sup>2+</sup> by zeolite A followed the Langmuir isotherm model and pseudo-second-order kinetic model. Moreover, the adsorption of Cd<sup>2+</sup> and Pb<sup>2+</sup> by zeolite A was found to be a spontaneous, endothermic process, as evidenced by increasingly negative Gibbs free energy change (Δ<i>G</i>°) values with rising temperature. Density functional theory (DFT) calculations were also performed to investigate the binding of Cd<sup>2+</sup> and Pb<sup>2+</sup> ions to zeolite A, providing insight into why Cd<sup>2+</sup> exhibits a slightly higher affinity than Pb<sup>2+</sup>. The results showed that Cd<sup>2+</sup> ions have a marginally greater affinity for zeolite A compared to Pb<sup>2+</sup> (−85.72 vs −85.39 kcal/mol), which aligns with experimental findings. This study offers an alternative approach for reducing industrial waste by repurposing it for valuable applications, contributing to sustainable waste management practices that align with the principles of the bio-circular-green economy.

Publication Details

Journal
Figshare
Published
2025-02-04
DOI
https://doi.org/10.1021/acsomega.4c09990.s001
Primary Topic
Adsorption and biosorption for pollutant removal
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Synthesis and Characterizationof Zeolite A from IndustrialFly Ash as a Green, Cost-Effective Cd2+ and Pb2+ Adsorbent for Wastewater Applications

Figshare
Adsorption and biosorption for pollutant removal
article

Synthesis and Characterizationof Zeolite A from IndustrialFly Ash as a Green, Cost-Effective Cd2+ and Pb2+ Adsorbent for Wastewater Applications

article en

Abstract

According to the large amount of fly ash waste generated from the use of lignite coal as the primary fuel for electricity generation in the Mae Moh district of Lampang province, Thailand, efforts have been made in waste management to reduce and repurpose this industrial byproduct. In this study, lignite coal fly ash was used to synthesize zeolite A adsorbents for the treatment of wastewater contaminated with heavy metals. Characterization of the synthesized zeolite using XRD, XRF, BET, and SEM methods confirmed that it is zeolite A, with a calculated Si/Al molar ratio of approximately 1.19, closely matching the theoretical ratio of zeolite A. This zeolite A exhibited a high crystalline phase and a mesoporous structure, having a specific surface area of 37.10 m<sup>2</sup>/g and a total pore volume of 0.06 cm<sup>3</sup>/g. The performance of this zeolite A was evaluated for the adsorption of Cd<sup>2+</sup> and Pb<sup>2+</sup> in prepared solutions. The removal efficiencies of zeolite A for Cd<sup>2+</sup> and Pb<sup>2+</sup> were 99.65% ± 0.1% and 93.90% ± 0.5%, with maximum adsorption capacities of 17.3 ± 0.6 and 8.8 ± 0.1 mg/g, respectively. Additionally, zeolite A demonstrated reusability for the adsorption of Cd<sup>2+</sup> and Pb<sup>2+</sup>, maintaining a removal efficiency of 80.52% ± 0.1% for Cd<sup>2+</sup> over five reuse cycles, and 96.83% ± 0.7% for Pb<sup>2+</sup> over one reuse cycle. The adsorption of Cd<sup>2+</sup> and Pb<sup>2+</sup> by zeolite A followed the Langmuir isotherm model and pseudo-second-order kinetic model. Moreover, the adsorption of Cd<sup>2+</sup> and Pb<sup>2+</sup> by zeolite A was found to be a spontaneous, endothermic process, as evidenced by increasingly negative Gibbs free energy change (Δ<i>G</i>°) values with rising temperature. Density functional theory (DFT) calculations were also performed to investigate the binding of Cd<sup>2+</sup> and Pb<sup>2+</sup> ions to zeolite A, providing insight into why Cd<sup>2+</sup> exhibits a slightly higher affinity than Pb<sup>2+</sup>. The results showed that Cd<sup>2+</sup> ions have a marginally greater affinity for zeolite A compared to Pb<sup>2+</sup> (−85.72 vs −85.39 kcal/mol), which aligns with experimental findings. This study offers an alternative approach for reducing industrial waste by repurposing it for valuable applications, contributing to sustainable waste management practices that align with the principles of the bio-circular-green economy.

Figshare
Clean water and sanitation
Openalex Percentile: Top 59%
Adsorption and biosorption for pollutant removal
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.