Model Test of Vertical and Radial Soil Pressure and Reinforcement Effect Research Under Dynamic Compaction

Purposes To investigate the influence of different tamping methods on the reinforcement effect of sand dynamic compaction, this research has been done from the perspective of soil stress distribution characteristics. Methods The dynamic compaction model test was carried out in the outdoor field to monitor the vertical and radial soil pressures in the soil and falling weight acceleration during tamping process, and the displacements in the soil were analyzed by numerical simulation method. Findings It is concluded that in the construction of dynamic compaction method, the vertical soil pressure waveform is the shock wave waveform or the vibration attenuation wave shape, and the radial earth pressure waveform is the impact waveform; There are two reinforcement modes in the process of dynamic compaction, the soil under tamping point is mainly vertically compacted, while the soil side of tamping point also has significant radial compaction; At the same level of dynamic compaction, heavy falling weight is suitable for deep soil and radial soil reinforcement, while light falling weight is suitable for rapid reinforcement of shallow soil. Conclusions The research results have a certain guiding significance for the selection of tamping methods of the same energy level dynamic compaction.