Differential analysis of sediment volume on fluid properties and debris flow disaster impact in the northwest traffic corridor of Sichuan Province

The LJ9 segment of Jiumian Expressway frequently experiences gully-type debris flow disasters, posing threats to nearby villages and infrastructure. Considering the unique characteristics and importance of the highway and G247 national road, this study investigates the material source characteristics and scale of six debris flow gullies with debris flow outbreak traces along the LJ9 section of Jiumian Expressway. The debris flows in this area are classified as low-frequency gully flash flood types. The bulk density of the debris flows ranges from 1.647 to 1.843 g/cm3, with velocities between 3.45 and 6.54 m/s, and flow rate ranging from 29.47 to 253.45 m3/s. The total volume of the debris flow ranges from 0.99×104 to 8.28×104 m3. This paper compares the differences in the scale characteristics of the “8•16” debris flow on the Jiumian Expressway, and analyze the relationship between the volume of material source and the bulk density and scale of debris flow, establishing relevant calculation formulas. The results show that: (1) The fluid properties of debris flow in the study area are classified as low-frequency gully flash flood types, closely related to the volume of material source, with a positive correlation between unit area material source volume and debris flow bulk density. When unit area material source volume exceeds 1.65×105 m3/km2 or falls below 1.13×105 m3/km2, debris flow exhibit viscous or diluted characteristics, respectively. (2) Under similar geological conditions, there is a linear correlation between material source volume and debris flow scale, with total debris flow volume decreasing as unit area material source volume decreases. (3) Debris flow damage potential is controlled by material source volume. Gullies with material source volumes exceeding 800 000 m3 are more likely to produce viscous debris flows, which has greater destructive power and form larger debris flow fans at their mouths. These findings provide insights for the design and construction of the Jiumian Expressway and serve as a scientific basis for the safe operation of infrastructure in mountainous regions and the construction work of geological hazard prevention projects.

Publication Details

Journal
SHILAP Revista de lepidopterología
Published
2024-10-01
DOI
https://doi.org/10.16031/j.cnki.issn.1003-8035.202312029
Primary Topic
Landslides and related hazards
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Differential analysis of sediment volume on fluid properties and debris flow disaster impact in the northwest traffic corridor of Sichuan Province

SHILAP Revista de lepidopterología
Landslides and related hazards
article

Differential analysis of sediment volume on fluid properties and debris flow disaster impact in the northwest traffic corridor of Sichuan Province

article en

Abstract

The LJ9 segment of Jiumian Expressway frequently experiences gully-type debris flow disasters, posing threats to nearby villages and infrastructure. Considering the unique characteristics and importance of the highway and G247 national road, this study investigates the material source characteristics and scale of six debris flow gullies with debris flow outbreak traces along the LJ9 section of Jiumian Expressway. The debris flows in this area are classified as low-frequency gully flash flood types. The bulk density of the debris flows ranges from 1.647 to 1.843 g/cm3, with velocities between 3.45 and 6.54 m/s, and flow rate ranging from 29.47 to 253.45 m3/s. The total volume of the debris flow ranges from 0.99×104 to 8.28×104 m3. This paper compares the differences in the scale characteristics of the “8•16” debris flow on the Jiumian Expressway, and analyze the relationship between the volume of material source and the bulk density and scale of debris flow, establishing relevant calculation formulas. The results show that: (1) The fluid properties of debris flow in the study area are classified as low-frequency gully flash flood types, closely related to the volume of material source, with a positive correlation between unit area material source volume and debris flow bulk density. When unit area material source volume exceeds 1.65×105 m3/km2 or falls below 1.13×105 m3/km2, debris flow exhibit viscous or diluted characteristics, respectively. (2) Under similar geological conditions, there is a linear correlation between material source volume and debris flow scale, with total debris flow volume decreasing as unit area material source volume decreases. (3) Debris flow damage potential is controlled by material source volume. Gullies with material source volumes exceeding 800 000 m3 are more likely to produce viscous debris flows, which has greater destructive power and form larger debris flow fans at their mouths. These findings provide insights for the design and construction of the Jiumian Expressway and serve as a scientific basis for the safe operation of infrastructure in mountainous regions and the construction work of geological hazard prevention projects.

SHILAP Revista de lepidopterología
Sustainable cities and communities
Openalex Percentile: Top 49%
Landslides and related hazards
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.