Resolving theMystery of the Extraordinary PolyelectrolyteBehavior (Anomalously Slow Diffusive Mode) after Half-Century of Research

Half a century ago, the presence of an anomalously slow diffusive mode in polyelectrolyte solutions (extraordinary behavior) was mentioned for the first time. The transition from high-salt to low-salt conditions was referred to as the “ordinary–extraordinary transition.” It was related to the appearance of large structures in solution appreciably exceeding the sizes of individual polyions despite like-charges on polyions and monovalent counterions. Despite appreciable experimental effort, no clear explanation of the origin of this phenomenon was reached, while existing theories of like-charge attraction were not able to explain experimental data. This work brings a resolution to this long-standing puzzle, although some questions remain still open. It is shown that there are two types of submicrometer-sized objects that occur simultaneously in polyelectrolyte solutions and contribute to the slow diffusive mode. Since their size distributions are very similar, it was not possible to identify them so far on the basis of simple scattering experiments. The first type of object originates from hydrophobic molecules commonly present in polyelectrolytes as unwanted admixtures, which (1) adhere to uncharged polymer chains; (2) are stripped from the chains upon ionization; (3) aggregate in water; and (4) the aggregation process stops at a mesoscale level because of developing a surface ζ-potential. These mesoscale particles/droplets can then be removed from solution by filtration, providing a practical method for the purification of polyelectrolytes to ultrahigh purity. Objects of the second type occur even in solutions of hydrophobe-free polyelectrolytes and give a substantially weaker scattering signal. Their unexpected characteristics are described, but still more data are needed to exactly unveil their origin. This work brings a new paradigm in the interpretation of older and future data, realizing that the acquired data represent mostly a mixture of contributions from two different mechanisms, which must be separated in order to be meaningfully analyzed and interpreted. Experiments in this work were performed on synthetic polyelectrolytes representing polyanions, polycations, strong polyelectrolytes, and weak polyelectrolytes, respectively.