Modulatingthe Pore Hydrophobicity and ElectronicStructure of Cerium MOFs for Enhanced Dimethyl Carbonate Productionfrom CO<sub>2</sub> and Methanol without Dehydrants

The one-step synthesis of dimethyl carbonate (DMC) from methanol (MeOH) and CO<sub>2</sub> plays an important role in carbon neutrality, but it is still far from practical application due to the undesirable use of dehydrants and the lack of rational design of efficient catalysts. Herein, the model of a CeO<sub>2</sub>-like cerium metal–organic framework (MOF) UiO-66-Ce-NH<sub>2</sub> was chosen to introduce a series of hydrophobic perfluoroalkyl groups into the –NH<sub>2</sub> group in the channel of the MOFs by postsynthesis modification to create a hydrophobic reaction environment and remove water molecules during the reaction process, thereby avoiding the need for additional dehydrants, denoted as UiO-66-Ce-F<sub><i>x</i></sub> (<i>x</i> = 3, 5, 7, 11, and 15). As a result, the catalytic performance of UiO-66-Ce-F<sub><i>x</i></sub> was significantly improved. Among them, UiO-66-Ce-F<sub>11</sub> exhibited the highest DMC formation rate of 408.25 mmol g<sup>–1</sup> h<sup>–1</sup> without additional dehydrants, which was about 13 times higher than that of unmodified UiO-66-Ce-NH<sub>2</sub>. Importantly, to the best of our knowledge, this has reached the highest level among currently reported catalysts for the one-step synthesis of DMC from MeOH and CO<sub>2</sub> in batch reactors. Mechanistic studies have shown that the highly efficient catalytic performance is attributed to the synergistic effect of the hydrophobicity and electron-rich capability of the fluorides in the MOF pores. On one hand, the introduction of hydrophobic fluorides creates a hydrophobic reaction site, which accelerates the transfer of water generated in real time during the reaction out of the reaction site, thereby promoting the forward reaction kinetically. On the other hand, the electron-rich fluorides optimize the electronic structure of the Ce sites, enhancing the thermodynamic adsorption and activation of the substrates CO<sub>2</sub> and MeOH. In the present work, a facile post-modification strategy to realize the synergistic promoting effect of thermodynamics and kinetics of one-step synthesis of DMC from CO<sub>2</sub> and MeOH will offer a whole new strategy to design high-efficiency catalysts for one-step synthesis of DMC.

Publication Details

Journal
Figshare
Published
2025-03-06
DOI
https://doi.org/10.1021/acssuschemeng.4c08623.s001
Primary Topic
Carbon dioxide utilization in catalysis
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Modulatingthe Pore Hydrophobicity and ElectronicStructure of Cerium MOFs for Enhanced Dimethyl Carbonate Productionfrom CO2 and Methanol without Dehydrants

Figshare
Carbon dioxide utilization in catalysis
article

Modulatingthe Pore Hydrophobicity and ElectronicStructure of Cerium MOFs for Enhanced Dimethyl Carbonate Productionfrom CO2 and Methanol without Dehydrants

article en

Abstract

The one-step synthesis of dimethyl carbonate (DMC) from methanol (MeOH) and CO<sub>2</sub> plays an important role in carbon neutrality, but it is still far from practical application due to the undesirable use of dehydrants and the lack of rational design of efficient catalysts. Herein, the model of a CeO<sub>2</sub>-like cerium metal–organic framework (MOF) UiO-66-Ce-NH<sub>2</sub> was chosen to introduce a series of hydrophobic perfluoroalkyl groups into the –NH<sub>2</sub> group in the channel of the MOFs by postsynthesis modification to create a hydrophobic reaction environment and remove water molecules during the reaction process, thereby avoiding the need for additional dehydrants, denoted as UiO-66-Ce-F<sub><i>x</i></sub> (<i>x</i> = 3, 5, 7, 11, and 15). As a result, the catalytic performance of UiO-66-Ce-F<sub><i>x</i></sub> was significantly improved. Among them, UiO-66-Ce-F<sub>11</sub> exhibited the highest DMC formation rate of 408.25 mmol g<sup>–1</sup> h<sup>–1</sup> without additional dehydrants, which was about 13 times higher than that of unmodified UiO-66-Ce-NH<sub>2</sub>. Importantly, to the best of our knowledge, this has reached the highest level among currently reported catalysts for the one-step synthesis of DMC from MeOH and CO<sub>2</sub> in batch reactors. Mechanistic studies have shown that the highly efficient catalytic performance is attributed to the synergistic effect of the hydrophobicity and electron-rich capability of the fluorides in the MOF pores. On one hand, the introduction of hydrophobic fluorides creates a hydrophobic reaction site, which accelerates the transfer of water generated in real time during the reaction out of the reaction site, thereby promoting the forward reaction kinetically. On the other hand, the electron-rich fluorides optimize the electronic structure of the Ce sites, enhancing the thermodynamic adsorption and activation of the substrates CO<sub>2</sub> and MeOH. In the present work, a facile post-modification strategy to realize the synergistic promoting effect of thermodynamics and kinetics of one-step synthesis of DMC from CO<sub>2</sub> and MeOH will offer a whole new strategy to design high-efficiency catalysts for one-step synthesis of DMC.

Figshare
Clean water and sanitation
Openalex Percentile: Top 66%
Carbon dioxide utilization in catalysis
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.