Selective C<sub>2+</sub> Alcohol Synthesis from SyngasBoosted by MnO<sub><i>x</i></sub>‑Doped CoFe BimetallicAlloy Carbide Catalysts
Direct synthesis of higher alcohols (HA) from syngas is an attractive route for converting nonpetroleum carbon feedstocks into high value-added fuels and chemical products. CoFe alloy carbide catalysts are promising for this reaction, but facilitating the alloy carbide formation is still challenging. Herein, a series of Mn-promoted catalysts with regulated proximity between Mn and CoFe<sub>2</sub>O<sub>4</sub> were prepared. It was found that the manganese species with close intimacy greatly facilitated the formation of ε’-(Co<sub><i>x</i></sub>Fe<sub>1–<i>x</i></sub>)<sub>2.2</sub>C, reaching a maximum content of 88.4 wt % over the Mn<sub>0.25</sub>Co<sub>1</sub>Fe<sub>2</sub> catalyst. A space-time yield toward HA of 137.9 mmol·g<sub>(Co+Fe)</sub><sup>–1</sup>·h<sup>–1</sup> with stability over 300 h was achieved over this catalyst, ranking top among the literature. In addition, MnO<sub><i>x</i></sub> also greatly promoted the CO dissociation. The closely interacted MnO<sub><i>x</i></sub> and ε’-(Co<sub><i>x</i></sub>Fe<sub>1–<i>x</i></sub>)<sub>2.2</sub>C sites benefited the coupling of CH<sub><i>x</i></sub>* and CO*/CHO*, leading to the modification of the Anderson-Schulz–Flory law and the enhanced C<sub>2+</sub> alcohols fraction in total alcohols up to 94.1 wt %. Moreover, the Mn content was also optimized. This promotional effect of manganese may provide possibilities for the use of CoFe alloy carbide catalysts in higher alcohol synthesis.
Publication Details
- Journal
- Figshare
- Published
- 2025-02-21
- DOI
- https://doi.org/10.1021/acscatal.4c07408.s001
- Primary Topic
- Catalysts for Methane Reforming
- Type
- article
- Field-Weighted Citation Impact
- 0.00