<i>n</i>‑UV-Converted Enhanced DownshiftingBlue Emission through Bi³⁺ Sensitization in Self-ActivatedLaNbO₄ Phosphors for LEDs and High Broadband Quantum CuttingEfficiency for Solar Cell Applications

This paper reports the downshifting (DS) and quantum cutting (QC) emissions in Bi³⁺-sensitized self-activated LaNbO₄ and LaNbO₄/Yb³⁺ phosphor materials. The Bi³⁺ and Yb³⁺ ion-doped/codoped phosphor materials were synthesized at 1473 K by a solid-state reaction method. The structural and optical characterization techniques have been carried out by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), photoluminescence (PL), and lifetime measurements. LaNbO₄ gives intense blue emission in the 350–600 nm region, with the maximum in the violet-blue region at 418 nm on ultraviolet (UV) excitation. The PL emission intensity was found to increase on doping of the Bi³⁺ ion. It is found that at lower concentrations (≤0.08 mol %), Bi³⁺ behaves as a sensitizer; however, at higher concentrations (>0.5 mol %), it acts as an activator by producing its own emission due to ³P₁ → ¹S₀ transition. The behavior of phosphors from low to high concentrations of Bi³⁺ has been investigated in detail by lifetime measurements and a suitable energy level diagram. The self-activated broad blue-emitting behavior of doped LaNbO₄:10Yb³⁺, xBi³⁺ has been used to produce strong QC near-infrared (NIR) emission on UV excitation (262 nm) at 0.08 (i.e., as a sensitizer) and at 2 mol % (as an activator) Bi³⁺ concentrations. The maximum broadband QC efficiency is found to be 148% in the LaNbO₄:0.08 Bi³⁺, 10Yb³⁺ phosphor at optimized Bi³⁺ and Yb³⁺ concentrations. We also investigated the QC emission at two distinct concentrations (0.08 and 2 mol %, i.e., sensitizer and activator, respectively) with varied Yb³⁺ concentrations from 0 to 13 mol % and compared with different other QC emitting phosphors. The LaNbO₄ host and Bi³⁺ ions (³P₁ level) both transfer energy to Yb³⁺ ions in two ways, and the two-step intense broadband quantum cutting would result in intense NIR emission. The NIR emission generated by this type of QC process can be used to enhance the efficiency of solar cells. The LaNbO₄:Bi³⁺ phosphor emits intense DS emission with high color purity (88.8%) in the blue region and therefore has been employed to produce an <i>n</i>-UV-converted strong blue source for light-emitting diode (LED) application.