Stabilizingthe SiO_<i>x</i> Anodeby a Highly Elastic Quasi-Solid Polyether-Based Electrolyte via anIn Situ Fabrication

Silicon monoxide (SiO_<i>x</i>, <i>x</i> ≈ 1) has been a promising candidate of anode materials for next-generation lithium-ion batteries due to its high specific capacity (∼2600 mA h g^–1). However, huge volume expansion and the resultant repeated destruction of the solid electrolyte interphase (SEI) are key challenges to the practical application of the SiO_<i>x</i> anode. In this work, a highly elastic quasi-solid polymer electrolyte (QSPE) is demonstrated for batteries employing an SiO_<i>x</i> anode, which is prepared via in situ cationic ring-opening polymerization employing 1,3,5-trioxane (TXE) as the monomer, 1,3,2-dioxathiolane 2,2-dioxide (DTD) as both the initiator and film-forming additive, and fluoroethylene carbonate as the plasticizer. This TXE-based QSPE possesses excellent ionic conductvity properties, including an extremely low glass-transition temperature of −94.3 °C, a high ionic conductivity of 1.36 mS cm^–1 at 25 °C, and a high Li⁺ transference number of 0.66. The long poly-TXE skeleton endows the polymer electrolyte with a high elastic modulus of 42 MPa, helping to effectively suppress the volume expansion of the SiO_<i>x</i> anode during cycling. DTD participates in the construction of a robust SEI containing Li₂SO_<i>x</i> species, mitigating the structural collapse of SiO_<i>x</i> particles. As a result, the cyclic stability of the SiO_<i>x</i> anode has been remarkably enhancedthe Li||SiO_<i>x</i> half-battery with the in situ TXE-based QSPE achieves 81.9% capacity retention after 200 cycles at 0.5C, exhibiting significant improvement over its liquid-state counterparts and showing promising application potential.