Spray Deposition on Nursery Apple Plants as Affected by an Air-Assisted Boom Sprayer Mounted on a Portal Tractor

Contemporary nurseries of fruit trees and ornamental plants constitute a key component in the production of high-quality planting material. At present, conventional technology dominates in nurseries in Poland and throughout the European Union. It is based on universal agricultural tractors working with numerous specialized machines—typically underutilized—including sprayers, inter-row cultivation equipment, fertilizer spreaders, and tree lifters. This concept entails several limitations and high investment costs. Because of the considerable size and turning radius of such machinery, a dense network of service roads (every 15–18 m) and wide headlands must be maintained. These areas, which constitute approximately 20% of the total surface, are effectively wasted yet require continuous agronomic maintenance. An alternative concept employs a set of implements mounted on a high-clearance portal tractor (1.6–1.8 m), forming a specialized unit capable of moving above the rows of nursery crops. The study objective of the research was to evaluate the air distribution generated by an air-jet system installed on a crop-spray boom mounted on a portal sprayer, and to assess spray deposition during treatments in nursery trees. Such a configuration enables the mechanization of a broader range of nursery operations than currently possible, while reducing investment costs compared with conventional technology. One still underutilized technology consists of sprayers with an auxiliary airflow (AA) generated by air sleeves. Mean air velocity was measured in three vertical planes, and they showed lower air velocity between 1.0 m and 5.5 m. Spray deposition on apple nursery trees was assessed using a fluorescent tracer. The experimental design consists of a comparative field experiment with and without air flow support, spraying at two standard working rates (200 and 400 L·ha−1) and determining the application of the liquid to plants in the nursery. The results demonstrated a positive effect of the AA system on deposition. At a travel speed of 6.0 km·h−1 and an application rate of 200 L·ha−1, deposition on the upper leaf surface was 68% higher with the fan engaged. For a 400 L·ha−1 rate, deposition increased by 47%, with both differences statistically significant. The study showed that the nursery sprayer mounted on a high-clearance portal tractor and equipped with an AA system achieved an increase of 58% in spray deposition on the upper leaf surface when the fan was operating at 200 L·ha−1 and 28% at 400 L·ha−1. Substantial differences were found between deposition on the upper and lower leaf surfaces, with the former being 20–30 times greater. Given the complexity of nursery production technology, sprayers that ensure the highest possible biological efficacy and high quality of nursery material will play a pivotal role in its development. At the current stage, AA technology fulfils these requirements.