Ordered assembly of bifunctional catalysts <i>via</i> 3D printing for CO <sub>2</sub> hydrogenation to light olefins
A monolithic InZr&SAPO-34 bifunctional catalyst assembled <i>via</i> direct ink writing 3D printing delivered an excellent C=2-C=4 selectivity of 80.6% from CO<sub>2</sub> hydrogenation due to the enhanced mass transfer effect. Our new concept revolutionizes the traditional physical mixing mode of bifunctional catalysts with chaotic mass transfer.
Authors
- Pei Dong (ORCID: https://orcid.org/0000-0002-9408-4764)
- Shaocong Wang (ORCID: https://orcid.org/0009-0005-1933-7361)
- Mingbo Wu (ORCID: https://orcid.org/0000-0003-0048-778X)
- Qiang Liu (ORCID: https://orcid.org/0000-0002-1269-7779)
- Yang Wang (ORCID: https://orcid.org/0000-0003-2245-9595)
- Chao Wang (ORCID: https://orcid.org/0000-0003-4812-6000)
- Shiyuan Lin (ORCID: https://orcid.org/0009-0008-2514-4488)
- Jiancai Sui
- Zhi Bian
Institutions
- Qingdao University of Science and Technology (CN)
- China Energy Engineering Corporation (China) (CN)
- Shandong Iron and Steel Group (China) (CN)
- Shandong Lianxing Energy Group (China) (CN)
- China University of Petroleum, East China (CN)
- Qingdao University of Technology (CN)
Publication Details
- Journal
- Chemical Communications
- Published
- 2025-12-09
- DOI
- https://doi.org/10.1039/d5cc06385j
- Primary Topic
- Catalysts for Methane Reforming
- Type
- article
- Field-Weighted Citation Impact
- 0.00