Microstructural responses and strengthening mechanism in different zones of laser additive repaired Ti17 titanium alloy via laser shock peening

Laser additive manufacturing has been employed to repair titanium alloy aero blades and blisks due to its low heat input and narrow heat-affected zone (HAZ). However, laser additive repaired (LAR) specimens exhibit weak tensile and fatigue properties due to coarse microstructure and tensile residual stresses. In this study, laser shock peening (LSP) was applied to the LARed Ti17 titanium samples. The present study systematically compared the microstructural responses to LSP between the LDZ and WSZ. Results showed that the highest dislocation density was found in the wrought substrate zone (WSZ) with a value of 19.01 × 10 14 m −2 , accompanied by stacking faults (SFs) distributed within grain boundaries of α phase. Unlike the dislocation proliferation observed in the WSZ, the LSP-treated laser deposited zone (LDZ) exhibits a distinct deformation mechanism: obstruction of dislocation glide triggers phase transformation from hexagonal-close-packed Ti (HCP–Ti) to face-centered-cubic Ti (FCC–Ti), with extensive twinning within the resultant FCC-Ti accommodating additional plastic strain. The orientation relationship between HCP-Ti and FCC-Ti was (0002) HCP //( 1 ‾ 1 1 ‾ ) FCC and [2 1 ‾ 1 ‾ 0] HCP //[ 1 ‾ 1 ‾ 0] FCC . Interactions between dislocations, twins and SFs fragmented the coarse microstructure into refined structures. Besides, a high-pressure laser shock wave induced compressive residual stress on the surface. Consequently, the synergistic contributions from both the LDZ and WSZ, which included grain refinement and induced compressive residual stress, resulted in an extension of fatigue life. • LSP could modify the microstructure and induce compressive residual stress in the laser additive repaired titanium alloys. • The transformation from hexagonal close-packed Ti to body-centered cubic Ti occurred after LSP. • The strengthening mechanisms of LSP on mechanical properties was revealed.

Authors

Publication Details

Journal
Journal of Materials Research and Technology
Published
2025-12-17
DOI
https://doi.org/10.1016/j.jmrt.2025.12.130
Primary Topic
Surface Treatment and Residual Stress
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Microstructural responses and strengthening mechanism in different zones of laser additive repaired Ti17 titanium alloy via laser shock peening

Guanda Qu, Hongyu Zhang, Wei Guo, Jie Ding et al.
Journal of Materials Research and Technology
Surface Treatment and Residual Stress
article

Microstructural responses and strengthening mechanism in different zones of laser additive repaired Ti17 titanium alloy via laser shock peening

Guanda Qu, Hongyu Zhang, Wei Guo, Jie Ding, Dongsheng He, Weiliang He, Jiaxuan Chi, Hongqiang Zhang
article en

Abstract

Laser additive manufacturing has been employed to repair titanium alloy aero blades and blisks due to its low heat input and narrow heat-affected zone (HAZ). However, laser additive repaired (LAR) specimens exhibit weak tensile and fatigue properties due to coarse microstructure and tensile residual stresses. In this study, laser shock peening (LSP) was applied to the LARed Ti17 titanium samples. The present study systematically compared the microstructural responses to LSP between the LDZ and WSZ. Results showed that the highest dislocation density was found in the wrought substrate zone (WSZ) with a value of 19.01 × 10 14 m −2 , accompanied by stacking faults (SFs) distributed within grain boundaries of α phase. Unlike the dislocation proliferation observed in the WSZ, the LSP-treated laser deposited zone (LDZ) exhibits a distinct deformation mechanism: obstruction of dislocation glide triggers phase transformation from hexagonal-close-packed Ti (HCP–Ti) to face-centered-cubic Ti (FCC–Ti), with extensive twinning within the resultant FCC-Ti accommodating additional plastic strain. The orientation relationship between HCP-Ti and FCC-Ti was (0002) HCP //( 1 ‾ 1 1 ‾ ) FCC and [2 1 ‾ 1 ‾ 0] HCP //[ 1 ‾ 1 ‾ 0] FCC . Interactions between dislocations, twins and SFs fragmented the coarse microstructure into refined structures. Besides, a high-pressure laser shock wave induced compressive residual stress on the surface. Consequently, the synergistic contributions from both the LDZ and WSZ, which included grain refinement and induced compressive residual stress, resulted in an extension of fatigue life. • LSP could modify the microstructure and induce compressive residual stress in the laser additive repaired titanium alloys. • The transformation from hexagonal close-packed Ti to body-centered cubic Ti occurred after LSP. • The strengthening mechanisms of LSP on mechanical properties was revealed.

Journal of Materials Research and TechnologyVol. 40
Openalex Percentile: Top 58%
Surface Treatment and Residual Stress
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.