Computational Modeling of the Temperature Distribution in a Butt Weld of AISI 304L Stainless Steel Using a Volumetric Heat Source

The Finite Element Method is an indispensable tool for analyzing the transient thermal phenomena in welding processes. This study aims to simulate the temperature field during Gas Metal Arc Welding of an AISI 304L V-groove butt joint, employing a volumetric heat source model. The numerical simulations were conducted using ABAQUS SIMULIA® (version 6.11-3) on a plate measuring 200 mm × 50 mm × 9.5 mm. For validation, the numerical results were compared against experimental data obtained at the Welding Engineering Research Laboratory of Federal University of Rio Grande. A parametric study was performed by varying the geometric parameter b (controlling the volumetric heat distribution depth) to enhance the model’s accuracy and achieve the closest approximation to experimental observations. The calibrated volumetric source demonstrated high accuracy, yielding low percentage differences between predicted and experimental peak temperatures: 1.02%, 2.50%, and 4.44% at the 4 mm, 8 mm, and 12 mm thermocouple positions, respectively.