Simulation and Experiment of Tilted Fiber Bragg Grating Humidity Sensor Coated with PVA/GO Nanofiber Films by Electrospinning

Relative humidity (RH) and temperature are crucial parameters in environmental monitoring and have attracted significant attention. However, traditional commercial sensors typically suffer from inherent limitations such as structural complexity, bulkiness, and high manufacturing costs. To address these issues, this study proposes a novel tilted fiber Bragg grating (TFBG)-based optical fiber humidity sensor, coated with a composite film of polyvinyl alcohol (PVA) and graphene oxide (GO). First, the sensing mechanisms of the TFBG functionalized with nanofiber films were theoretically analyzed, and the transmission spectra of TFBG under varied structural parameters were simulated. These theoretical investigations laid a solid foundation for subsequent experimental validation. Subsequently, PVA/GO composite nanofiber films tailored for humidity sensing were fabricated by electrospinning technology, and the proposed TFBG sensor was experimentally implemented in accordance with the theoretical design. The experimental results indicate that the developed sensor exhibits a humidity sensitivity of -0.24 pm/%RH within the RH range of 35-85%. Furthermore, we calculated temperature and RH changes while discounting cross-sensitivity, thereby enabling simultaneous decoupling of temperature and RH measurements. Owing to its distinctive advantages of compact size, light weight, and cost-effectiveness, the proposed TFBG sensor holds great promise for practical applications in environmental monitoring.