Topology Optimization of Structural Glass Beams: Design, Fabrication, and Validation
This study explores the use of topology optimization (TO) in the design of planar glass beams, detailing fabrication using abrasive water-jet cutting (AWJ) and validating the entire process through digital photoelastic experiments. A yield stress criterion tailored for glass material is employed, focusing on maximum principal stress. The separation of tensile and compressive stress contributions in the criterion guides the convergence toward optimal topologies, unlike the Von Mises criterion. This proposition is found to reduce tensile stress in optimized designs, which is particularly suited for structures made from brittle materials. The optimal layouts are successfully fabricated via AWJ, and the mechanical stress behavior of the beams is found to closely match the computational models. This demonstrates that AWJ enables the leverage of TO to produce lightweight, complex glass structures with validated mechanical performance.
Authors
- Maxime Vassaux (ORCID: https://orcid.org/0000-0003-2975-0625)
- Raveth Hin (ORCID: https://orcid.org/0000-0001-9838-4206)
- Kimhong Heng (ORCID: https://orcid.org/0000-0002-5527-6085)
- Chansopheak Seang
Institutions
- Institute of Technology of Cambodia (KH)
- Institut de Physique de Rennes (FR)
- Université de Rennes (FR)
Publication Details
- Journal
- Glass Europe
- Published
- 2026-11-17
- DOI
- https://doi.org/10.52825/glass-europe.v4i.3192
- Citations
- 1
- Primary Topic
- Topology Optimization in Engineering
- Type
- article
- Field-Weighted Citation Impact
- 1.53
Funders
- Université de Rennes 1