Determination of Triboloading Conditions of Composite Material Based on AO20-1 Alloy
Tribological tests of a composite material based on the antifriction alloy AOM20-1 were carried out. The samples were produced using reaction casting, mixing titanium particles to form a structure with intermetallic strengthening. Dry sliding friction tests were carried out at sliding speeds from 0.25 to 0.75 m/s and loads from 0.5 to 3.0 MPa. A comprehensive comparison of the tribological properties of samples and friction processes (wear intensity, friction coefficient, stability index) was used. The loading conditions under which the material demonstrates the best set of characteristics have been determined: sliding speed of 0.5 m/s under a load of 1.5 MPa.
Authors
- R. S. Mikheev (ORCID: https://orcid.org/0000-0002-2314-3229)
- P. A. Bykov (ORCID: https://orcid.org/0000-0002-3380-7033)
- I. E. Kalashnikov (ORCID: https://orcid.org/0000-0003-0740-7420)
- I. V. Katin
- L. I. Kobelva
Institutions
- Bauman Moscow State Technical University (RU)
- Baikov Institute of Metallurgy and Materials Science (RU)
Publication Details
- Journal
- Inorganic Materials Applied Research
- Published
- 2025-12-01
- DOI
- https://doi.org/10.1134/s207511332570220x
- Primary Topic
- Tribology and Wear Analysis
- Type
- article
- Field-Weighted Citation Impact
- 0.00