Thin-Layer Dust Accumulation Effects on Photovoltaic Modules and Design Optimization for the Module Structure

The output power of photovoltaic modules is significantly reduced by solar irradiance shading. To address this issue, innovative strategies for mitigating shading effects have been continuously explored. In this study, detailed research on the edge dust accumulation effect of modules has been conducted. It is found that under vertical installation, when the shading ratio reaches 50%, the output power of full-cell modules decreases by 42%, while that of half-cell modules drops by only 27%. Moreover, when the shading ratio reaches 100%, the output power of full-cell modules declines by nearly 99%. In contrast, half-cell modules are still able to maintain nearly 50% of their output power. These results demonstrate that half-cell modules exhibit significantly better resistance to shading compared to full-cell modules. On the other hand, under a horizontal layout, power degradation for both full-cell and half-cell modules is observed to be approximately 16% when the shading ratio is 25%, and around 36% when the coverage reaches 50%. Experimental results further revealed that shading under horizontal orientation leads to a multi-peak power output profile, which poses a risk of the PV inverter being trapped in local maxima. Overall, half-cell modules demonstrated better resistance to dust-induced shading under both layouts. Based on these findings, novel module design schemes are proposed to enhance resistance to dust accumulation effects. The proposed method can effectively reduce power losses caused by edge dust-induced shading and improve the annual power generation of PV modules, thereby offering technical support for effectively enhancing the operational stability of PV power generation systems.