User Plane Performance in Beyond 5G Networks: Comprehensive Analysis and Evaluation

Emerging applications such as autonomous driving, virtual reality, and smart factories place greater demands on the Quality of Service of existing network infrastructure, particularly radio networks. The current 5th and new 6th generation of cellular networks aim to meet these requirements and provide ubiquitous connectivity to devices with diverse demands. These networks comprise a control plane and a user plane. While the control plane is responsible for managing the network and its devices, the user plane forwards data and directly influences the experienced Quality of Service. A key network function in the user plane is the User Plane Function (UPF), which forwards packets between cellular network devices and the data network, such as the Internet or an edge data center. However, the extent to which existing UPF implementations can provide sufficient Quality of Service for emerging applications remains largely unexplored. In this work, we analyze and compare various UPF implementations from both theoretical and practical perspectives. We consider both software-based and hardware-accelerated implementations and compare them in terms of performance and latency under load. The setup enables up to 10,000 subscriber sessions while enforcing QoS mechanisms such as rate limiting. The evaluation demonstrates that three of the four investigated UPFs provide QoS enforcement, while their latency behavior differs by orders of magnitude depending on the employed technology.