Optimizing virtual synchronous generator control in MMC-based HVDC systems for power system oscillation damping

• The paper focuses on optimising Virtual Synchronous Generator (VSG) control in Modular Multilevel Converter (MMC)-based HVDC systems to enhance power system stability and oscillation damping. • It introduces virtual inertia and damping to mimic synchronous generator behaviour, improving frequency and voltage regulation. • The proposed control strategy ensures smooth transitions between grid-connected and islanded modes, suppresses harmonics, and addresses challenges like low inertia and weak grid conditions. • Simulation results validate the effectiveness of the VSG-controlled MMC in maintaining stability during dynamic and transient events, making it suitable for future power systems with high renewable energy integration. This paper discusses the development of a Virtual Synchronous Generator utilizing a Modular Multilevel Converter. The control system employs an internal simulation of the electromechanical swing equation to replicate the inertia and damping characteristics of a synchronous generator, enabling the generation of the necessary frequency and phase angle for MMC control as a VSG. The ac-side management involves cascaded voltage and current controllers operating within a synchronous reference frame defined by the virtual swing equation. Simulation findings validate the performance of the VSG-controlled MMC when connected to an external AC grid and in islanded mode with a resistive load. This paper validates, through experimentation, the effectiveness of controlling a Modular Multilevel Converter (MMC) as a Virtual Synchronous Generator (VSG) designed to deliver virtual inertia and robust frequency stabilization in power systems with low physical inertia. The proposed control structure incorporates a virtual swing equation, cascaded voltage and current regulation loops, reactive power control, and emulated impedance. A 60 kVA MMC model was employed to demonstrate the system’s capabilities. During frequency disturbances such as a drop from 50 Hz to 49.8 Hz, the controller facilitated dynamic power injection up to approximately 35 kW while capping peak currents at 100 A. Frequency deviations were mitigated within 300 milliseconds, and the converter exhibited seamless transitions to islanded operation along with reliable voltage control during load variations. These findings confirm the proposed controller’s effectiveness in maintaining grid stability under diverse operating conditions.