Topology Optimization and Leakage Current Suppression of Photovoltaic Energy Storage Four-Leg Inverter Based on Independent Split Capacitor

Leakage current is a prevalent issue in non-isolated photovoltaic (PV) energy storage inverter systems, which not only induces additional power losses but also poses potential safety hazards and degrades system operational efficiency. To address this critical problem, this paper proposes an improved three-phase four-leg PV energy storage inverter topology integrated with independent split capacitors, based on the traditional three-level topology. First, an in-depth analysis of the leakage current generation mechanism is conducted, focusing on the impacts of common-mode voltage fluctuations and parasitic capacitance on leakage current paths. By establishing an equivalent mathematical model, a systematic comparative analysis is performed between the proposed topology and the traditional topology regarding key performance indicators, including leakage current suppression capability, DC-side neutral point potential stability, and power quality. Notably, the improved topology requires no additional control strategy design; under the same carrier modulation strategy and parameter configuration as the traditional topology, it can stably constrain the DC-side neutral point potential to fluctuate within an acceptable range. Experimental results demonstrate that the proposed topology reduces the peak leakage current to within 200 mA while maintaining the total harmonic distortion (THD) of the load-side current at a low level. These performance metrics comply with the relevant national and industry power quality standards for PV grid-connected systems, endowing the topology with high engineering practical value.