Comparative evaluation of quantifiable PFAS generated as byproducts from polytetrafluoroethylene (PTFE) incineration

• We quantified PFAS byproducts generated from PTFE incineration. • The temperature-dependent behavior of PFAS was evaluated. • Total PFAS levels were suppressed at temperatures above 850 °C. • The behavior of 13 PFCAs and 4 PFECAs was quantitatively characterized. • The distribution of individual PFAS across eight media was determined. There is a need for quantitative data on generation of per- and polyfluoroalkyl substances (PFAS) during incineration of polytetrafluoroethylene (PTFE) at the end of the lifecycle of PTFE products. This study quantified the temperature-dependent generation of PFAS byproducts that were formed during the thermal decomposition of PTFE in an oxidizing atmosphere. The PFAS analyzed were C 4 to C 18 perfluoroalkyl carboxylic acids (PFCAs) and four compounds of perfluoroalkyl ether carboxylic acids (PFECAs). As a result of the blank tests, trace amounts of PFAS were detected. Therefore, the results for byproduct PFAS were discussed after subtracting the blank values. After incineration, total PFAS byproducts formed at a maximum of 0.028 % (700 °C) and a minimum of 6.9 × 10⁻⁶ % (950 °C) relative to the PTFE input. Comparative evaluation of total PFAS byproducts generated during PTFE incineration showed that the changes observed were comparable to or were one order of magnitude lower than those observed for PFAS byproducts generated during the thermal decomposition of perfluorooctanoic acid (PFOA) and perfluorooctadecanoic acid (PFOcDA). Analysis of individual PFAS data revealed relatively high levels of short-chain PFCAs as byproducts, high-temperature suppression of long-chain PFCAs, characteristic generation patterns of PFECAs, and trace residues of PFOA at elevated temperatures. Based on the distribution behavior of individual PFAS by medium, we found that in addition to adsorption by resins, capture using solutions such as toluene or NaOH is necessary depending on the carbon number. This report demonstrated that decomposition of PTFE at temperatures above 850 °C can suppress the generation of PFAS byproducts to the levels equivalent to or lower than those produced during decomposition of regulated PFAS.

Authors

Institutions

Publication Details

Journal
Journal of Fluorine Chemistry
Published
2025-12-02
DOI
https://doi.org/10.1016/j.jfluchem.2025.110523
Primary Topic
Per- and polyfluoroalkyl substances research
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Comparative evaluation of quantifiable PFAS generated as byproducts from polytetrafluoroethylene (PTFE) incineration

Hidekazu Okamoto, Takashi Fujimori, Taichi Murakami, Takumi Mine et al.
Journal of Fluorine Chemistry
Per- and polyfluoroalkyl substances research
article

Comparative evaluation of quantifiable PFAS generated as byproducts from polytetrafluoroethylene (PTFE) incineration

Hidekazu Okamoto, Takashi Fujimori, Taichi Murakami, Takumi Mine, Ayame Saido
article en

Abstract

• We quantified PFAS byproducts generated from PTFE incineration. • The temperature-dependent behavior of PFAS was evaluated. • Total PFAS levels were suppressed at temperatures above 850 °C. • The behavior of 13 PFCAs and 4 PFECAs was quantitatively characterized. • The distribution of individual PFAS across eight media was determined. There is a need for quantitative data on generation of per- and polyfluoroalkyl substances (PFAS) during incineration of polytetrafluoroethylene (PTFE) at the end of the lifecycle of PTFE products. This study quantified the temperature-dependent generation of PFAS byproducts that were formed during the thermal decomposition of PTFE in an oxidizing atmosphere. The PFAS analyzed were C 4 to C 18 perfluoroalkyl carboxylic acids (PFCAs) and four compounds of perfluoroalkyl ether carboxylic acids (PFECAs). As a result of the blank tests, trace amounts of PFAS were detected. Therefore, the results for byproduct PFAS were discussed after subtracting the blank values. After incineration, total PFAS byproducts formed at a maximum of 0.028 % (700 °C) and a minimum of 6.9 × 10⁻⁶ % (950 °C) relative to the PTFE input. Comparative evaluation of total PFAS byproducts generated during PTFE incineration showed that the changes observed were comparable to or were one order of magnitude lower than those observed for PFAS byproducts generated during the thermal decomposition of perfluorooctanoic acid (PFOA) and perfluorooctadecanoic acid (PFOcDA). Analysis of individual PFAS data revealed relatively high levels of short-chain PFCAs as byproducts, high-temperature suppression of long-chain PFCAs, characteristic generation patterns of PFECAs, and trace residues of PFOA at elevated temperatures. Based on the distribution behavior of individual PFAS by medium, we found that in addition to adsorption by resins, capture using solutions such as toluene or NaOH is necessary depending on the carbon number. This report demonstrated that decomposition of PTFE at temperatures above 850 °C can suppress the generation of PFAS byproducts to the levels equivalent to or lower than those produced during decomposition of regulated PFAS.

Journal of Fluorine ChemistryVol. 289
Ryukoku University (JP), Asahi Glass (Japan) (JP), Shimadzu (Japan) (JP)
Openalex Percentile: Top 67%
Per- and polyfluoroalkyl substances research
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.