Towards a Digital Virtual Twin for Heterogeneous Thermomechanical Experiments

ABSTRACT The combination of digital image correlation with infrared thermography (DIC‐IRT) in heterogeneous thermomechanical tests enables the simultaneous measurement of temperature and deformation fields and can be used to identify thermomechanical constitutive parameters using inverse identification methods. However, two major challenges remain. The first is the quantification of experimental uncertainties on identification results. The second is the design of optimal test configurations that allow a single heterogeneous DIC‐IRT experiment to be reliably exploited for the inverse identification of unknown constitutive parameters. To address the first challenge, this paper presents the first developments towards a digital virtual twin (DVT) able to simulate heterogeneous thermomechanical tests integrating DIC‐IRT. The proposed methodology relies on virtual image deformation, which mimics kinematic field measurements with DIC. To include thermal field measurements, a numerical measurement chain is added to simulate the acquisition of infrared images and the spatial synchronization with kinematic data. Based on this approach, a metrological study has enabled the characterization of parameters required to reproduce the experimental uncertainties in the measurement chain. The DVT was then used to simulate a thermomechanical test, which consists of a thick steel sample subjected to heterogeneous thermal strain and temperature fields. The test is designed to identify the thermal expansion coefficient and thermophysical properties from a single experiment using finite element model updating (FEMU). By processing virtual DIC‐IRT data with FEMU, the confidence intervals on the identified parameters were predicted based on random and systematic errors in DIC‐IRT measurements. Finally, the main limitation hampering the use of the proposed DVT for optimizing the design of heterogeneous thermomechanical tests is discussed, along with potential strategies to overcome it.

Authors

Institutions

Publication Details

Journal
Strain
Published
2025-12-01
DOI
https://doi.org/10.1111/str.70020
Primary Topic
Fatigue and fracture mechanics
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Towards a Digital Virtual Twin for Heterogeneous Thermomechanical Experiments

Sam Coppieters, Sandrine Thuillier, Alessandro Lambrughi
Strain
Fatigue and fracture mechanics
article

Towards a Digital Virtual Twin for Heterogeneous Thermomechanical Experiments

Sam Coppieters, Sandrine Thuillier, Alessandro Lambrughi
article en

Abstract

ABSTRACT The combination of digital image correlation with infrared thermography (DIC‐IRT) in heterogeneous thermomechanical tests enables the simultaneous measurement of temperature and deformation fields and can be used to identify thermomechanical constitutive parameters using inverse identification methods. However, two major challenges remain. The first is the quantification of experimental uncertainties on identification results. The second is the design of optimal test configurations that allow a single heterogeneous DIC‐IRT experiment to be reliably exploited for the inverse identification of unknown constitutive parameters. To address the first challenge, this paper presents the first developments towards a digital virtual twin (DVT) able to simulate heterogeneous thermomechanical tests integrating DIC‐IRT. The proposed methodology relies on virtual image deformation, which mimics kinematic field measurements with DIC. To include thermal field measurements, a numerical measurement chain is added to simulate the acquisition of infrared images and the spatial synchronization with kinematic data. Based on this approach, a metrological study has enabled the characterization of parameters required to reproduce the experimental uncertainties in the measurement chain. The DVT was then used to simulate a thermomechanical test, which consists of a thick steel sample subjected to heterogeneous thermal strain and temperature fields. The test is designed to identify the thermal expansion coefficient and thermophysical properties from a single experiment using finite element model updating (FEMU). By processing virtual DIC‐IRT data with FEMU, the confidence intervals on the identified parameters were predicted based on random and systematic errors in DIC‐IRT measurements. Finally, the main limitation hampering the use of the proposed DVT for optimizing the design of heterogeneous thermomechanical tests is discussed, along with potential strategies to overcome it.

StrainVol. 61(6)
HOGENT University of Applied Sciences and Arts (BE), Centre National de la Recherche Scientifique (FR), Université de Bretagne Sud (FR), Ghent University (BE), Institut de Recherche Dupuy de Lôme (FR), KU Leuven (BE)
Openalex Percentile: Top 58%
Fatigue and fracture mechanics
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.