Analysis, design, and fabrication of a high-gain low-profile metasurface antenna using direct feeding of Sievenpiper’s HIS

High Impedance Surfaces (HIS) have recently shown the ability to support leaky waves, and to excite plasmonic and HIS resonance frequency modes for use as an antenna. In this paper, we analyzed, designed, and fabricated a true metasurface antenna (TMA) by directly feeding edge-located HIS cells through a microstrip feeding network. In contrast to other metasurface antennas that necessitate an external antenna to excite metasurfaces, our approach is inspired by the TMA design methodology that directly feeds the HIS cells rather than using it as a reflector. We developed a circuit model for the proposed structure and compared the results with those obtained from full-wave simulations. In addition, our further objective was to simplify the structure based on the working principle of the proposed antenna. This objective was achieved by converting square patches into parallel strip lines, leading to an aperture efficiency of about 77%. This simplification also creates additional space to explore various resonant patterns on the top surface and the feeding network on the bottom surface of the TMA. Full-wave simulation results indicate that, despite the compact dimensions of the proposed array with 64 electrically small patch resonators ([Formula: see text], where λ is the free space wavelength at 6.0 GHz), it achieves a realized gain, HPBW (3dB beamwidth) of about 15.1 dBi and [Formula: see text] respectively at 6.0 GHz. Finally, we constructed a prototype and conducted measurements to validate the design. Measured results demonstrate good agreement with simulation ones with a gain of about 13.5 (±0.5) dBi and a HPBW of [Formula: see text] at 6.0 GHz. The proposed TMA is scaled to fit within the required dimensions for smart handheld devices at higher frequencies (e.g., 54 GHz), while maintaining high gain capability. The design's scalability, single-feed, and compact footprint make it optimal for diverse wireless communication systems, such as car-to-car (C2C) communications.

Authors

Institutions

Publication Details

Journal
Scientific Reports
Published
2025-12-02
DOI
https://doi.org/10.1038/s41598-025-30458-8
Citations
1
Primary Topic
Antenna Design and Analysis
Type
article
Field-Weighted Citation Impact
4.99

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Analysis, design, and fabrication of a high-gain low-profile metasurface antenna using direct feeding of Sievenpiper’s HIS

Mojtaba Joodaki, Alireza Ghaneizadeh, S.F. Peik, Martin Schneider
1 citations
Scientific Reports
Antenna Design and Analysis
4.99
article

Analysis, design, and fabrication of a high-gain low-profile metasurface antenna using direct feeding of Sievenpiper’s HIS

Mojtaba Joodaki, Alireza Ghaneizadeh, S.F. Peik, Martin Schneider
article en
1 citations

Abstract

High Impedance Surfaces (HIS) have recently shown the ability to support leaky waves, and to excite plasmonic and HIS resonance frequency modes for use as an antenna. In this paper, we analyzed, designed, and fabricated a true metasurface antenna (TMA) by directly feeding edge-located HIS cells through a microstrip feeding network. In contrast to other metasurface antennas that necessitate an external antenna to excite metasurfaces, our approach is inspired by the TMA design methodology that directly feeds the HIS cells rather than using it as a reflector. We developed a circuit model for the proposed structure and compared the results with those obtained from full-wave simulations. In addition, our further objective was to simplify the structure based on the working principle of the proposed antenna. This objective was achieved by converting square patches into parallel strip lines, leading to an aperture efficiency of about 77%. This simplification also creates additional space to explore various resonant patterns on the top surface and the feeding network on the bottom surface of the TMA. Full-wave simulation results indicate that, despite the compact dimensions of the proposed array with 64 electrically small patch resonators ([Formula: see text], where λ is the free space wavelength at 6.0 GHz), it achieves a realized gain, HPBW (3dB beamwidth) of about 15.1 dBi and [Formula: see text] respectively at 6.0 GHz. Finally, we constructed a prototype and conducted measurements to validate the design. Measured results demonstrate good agreement with simulation ones with a gain of about 13.5 (±0.5) dBi and a HPBW of [Formula: see text] at 6.0 GHz. The proposed TMA is scaled to fit within the required dimensions for smart handheld devices at higher frequencies (e.g., 54 GHz), while maintaining high gain capability. The design's scalability, single-feed, and compact footprint make it optimal for diverse wireless communication systems, such as car-to-car (C2C) communications.

Scientific ReportsVol. 15(1)
Hochschule Bremen (DE), University of Bremen (DE), Constructor University (DE), Constructing Excellence (GB)
Deutsche Forschungsgemeinschaft
Openalex Percentile: Top 4%
Antenna Design and Analysis
4.99
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.