Basic Research on Preparation Technology for Nanoparticles with Functional 
Dyes Immobilized in PMMA

The goal of this research is to prepare polymethyl methacrylate (PMMA) nanoparticles with an average particle diameter of less than 100 nm in which a functional dye that absorbs near-infrared light is immobilized. In the experimental conditions used in this study, the liquid-in-drying method was employed to prepare the nanoparticles by dissolving the polymer as the wall material and the functional dye in an organic solvent and dispersing the O/W emulsion in water. As a result, the particle size tended to decrease as the concentration of nonionic surfactant added to the dispersed phase was increased, and nanoparticles with functional dyes below 100 nm could be prepared under conditions of 15 wt% or higher. However, as the surfactant concentration increased, the functional dye content decreased. In the dispersion stability tests of the prepared nanoparticles had a high dispersion stability under a static condition for 7 days expect for the nanoparticles prepared with Tween80 concentration of 1 wt%.