Hierarchical NiFe-LDH on Conductive Ni3Se2 Scaffolds for Efficient Oxygen Evolution Reaction

Abstract Developing earth-abundant oxygen-evolution reaction (OER) electrodes that operate efficiently at practical current densities remains a challenge because NiFe layered double hydroxides (LDHs), which are among the most active non-noble catalysts in alkaline media, are limited by poor electronic conductivity, nanosheet restacking, and weak contact with current collectors. Herein, we develop a binder-free, integrated NiFe-LDH/Ni3Se2@nickel foam (NF) electrode fabricated using a sequential hydrothermal route: Ni3Se2 is first grown on NF using Se powder and hydrazine, followed by the in-situ deposition of NiFe-LDH nanosheets. X-ray diffraction verifies the crystalline Ni3Se2 backbone and, after LDH growth, a diagnostic low-angle peak near 2θ ≈ 11o is observed, assigned to the (003) basal reflection of hydrotalcite-like LDH. Field-emission scanning electron microscopy and energy-dispersive X-ray spectroscopy reveal conformal LDH coverage on the selenide scaffold with uniform Ni, Fe, and O signals, whereas X-ray photoelectron spectroscopy shows mixed-valent Ni2+/Ni3+ and Fe3+ in the shell, preserved Se2- from the core, and hydroxyl/water species in O 1s, consistent with a hydrotalcite-like surface that readily evolves to Ni(Fe)OOH under an anodic bias. Electrochemically, the heterostructure exhibits lower overpotentials at 50–100 mA·cm-2, a smaller Tafel slope, and reduced charge-transfer resistance relative to NiFe-LDH@NF and Ni3Se2@NF. The gains correlate with the largest double-layer capacitance and electrochemically active surface area, and the electrode exhibits stable chronopotentiometric operation. We attribute this performance to synergistic interfacial coupling and rapid electron-transport through Ni3Se2, together with abundant, well-wired LDH active sites and improved mass transport in the open 3D foam. This study provides a general strategy for fabricating high-rate alkaline OER electrodes based on LDH/metal selenide heterostructure.

Authors

Institutions

Publication Details

Journal
Korean Journal of Metals and Materials
Published
2025-12-01
DOI
https://doi.org/10.3365/kjmm.2025.63.12.976
Primary Topic
Electrocatalysts for Energy Conversion
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Hierarchical NiFe-LDH on Conductive Ni3Se2 Scaffolds for Efficient Oxygen Evolution Reaction

Yuseong Jang, Toshu An, Dong Ho You, Jeong Ho Ryu et al.
Korean Journal of Metals and Materials
Electrocatalysts for Energy Conversion
article

Hierarchical NiFe-LDH on Conductive Ni3Se2 Scaffolds for Efficient Oxygen Evolution Reaction

Yuseong Jang, Toshu An, Dong Ho You, Jeong Ho Ryu, Soon-Yong Kweon
article en

Abstract

Abstract Developing earth-abundant oxygen-evolution reaction (OER) electrodes that operate efficiently at practical current densities remains a challenge because NiFe layered double hydroxides (LDHs), which are among the most active non-noble catalysts in alkaline media, are limited by poor electronic conductivity, nanosheet restacking, and weak contact with current collectors. Herein, we develop a binder-free, integrated NiFe-LDH/Ni3Se2@nickel foam (NF) electrode fabricated using a sequential hydrothermal route: Ni3Se2 is first grown on NF using Se powder and hydrazine, followed by the in-situ deposition of NiFe-LDH nanosheets. X-ray diffraction verifies the crystalline Ni3Se2 backbone and, after LDH growth, a diagnostic low-angle peak near 2θ ≈ 11o is observed, assigned to the (003) basal reflection of hydrotalcite-like LDH. Field-emission scanning electron microscopy and energy-dispersive X-ray spectroscopy reveal conformal LDH coverage on the selenide scaffold with uniform Ni, Fe, and O signals, whereas X-ray photoelectron spectroscopy shows mixed-valent Ni2+/Ni3+ and Fe3+ in the shell, preserved Se2- from the core, and hydroxyl/water species in O 1s, consistent with a hydrotalcite-like surface that readily evolves to Ni(Fe)OOH under an anodic bias. Electrochemically, the heterostructure exhibits lower overpotentials at 50–100 mA·cm-2, a smaller Tafel slope, and reduced charge-transfer resistance relative to NiFe-LDH@NF and Ni3Se2@NF. The gains correlate with the largest double-layer capacitance and electrochemically active surface area, and the electrode exhibits stable chronopotentiometric operation. We attribute this performance to synergistic interfacial coupling and rapid electron-transport through Ni3Se2, together with abundant, well-wired LDH active sites and improved mass transport in the open 3D foam. This study provides a general strategy for fabricating high-rate alkaline OER electrodes based on LDH/metal selenide heterostructure.

Korean Journal of Metals and MaterialsVol. 63(12)
Korea National University of Transportation (KR)
National Research Foundation, National Research Foundation of Korea, Ministry of Education, India, Ministry of Science and ICT, South Korea
Openalex Percentile: Top 73%
Electrocatalysts for Energy Conversion
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.