3D-printed soy protein and microalga films: A sustainable approach with antioxidant functionality

This study investigated the optimization and fabrication of soy protein isolate (SPI)-green microalga (MA) 3D-printed films. For optimizing 3D printing, the effects of MA concentration, nozzle size (0.52-0.81 mm), and speed(10-20 mm/s) were examined. The printed films were then dried, and color, mechanical properties, water vapor permeability, structure, and antioxidant activity were analyzed. All the formulations showed shear-thinning behavior and rapid recovery. The concentration of 3 % MA, nozzle size of 0.72 mm, and printing speed of 20 mm/s were selected as the optimized conditions for the best 3D printability. Compared with the control, their elongation at break decreased by more than 16 %, while puncture strength increased by over 12 %, and tensile strength rose by more than 40 %. Water vapor permeability decreased by more than 40 % with the addition of MA. The microstructure images and secondary structure confirmed the formation of a less porous and stronger gel network with an increase in MA concentration from 0 to 5 % (w/w). The antioxidant properties of SPI films also increased two-fold with the addition of MA. These findings highlight that the 3D-printed edible films with antioxidant properties could be used as an eco-friendly and nutritious alternative to petroleum-based films in food packaging.