Application of Laser and Cryogenic Surface Treatment for the Evolution of Surface Morphology in Additively Manufactured Ti-6Al-4V Alloy Samples

This study investigates the effects of laser and cryogenic (dry ice) surface treatments on enhancing surface characteristics of Ti-6Al-4V titanium alloy components produced using the Selective Laser Melting (SLM) technique. Components produced via additive manufacturing often exhibit increased surface irregularities and residual unmelted powder, which can deteriorate their mechanical strength and resistance to corrosion. In this study, SLM samples manufactured with two laser powers (176 W and 220 W) were subjected to laser cleaning and dry ice blasting under various process parameters. Surface topography and morphology analyses were performed. The obtained results showed that both methods improved surface uniformity and removed contaminants. Dry ice treatment effectively removed loose powder particles and impurities without causing structural changes-the best results were obtained at a pressure of 10 bar. Laser treatment, depending on the focal length, produced varying degrees of surface remelting-from gentle smoothing (500 mm) to intensive thermal effects and microcracks (250 mm). The research confirmed that cryogenic cleaning is an environmentally friendly and safe post-processing method, while laser cleaning enables deeper surface structure modification, requiring further optimization.