Guided-jet waves generated by an acoustic source in a jet at a Mach number of 0.95

The guided-jet waves (GJWs) that may be trapped into a jet are investigated by simulating the propagation of the waves generated by an acoustic source on the axis of a jet at a Mach number of 0.95. The flow is modelled as a cylindrical shear layer to avoid reflections in the axial direction. For the source frequencies considered, GJWs belonging to the first two radial GJW axisymmetric modes are observed. They propagate in the upstream or downstream directions, and are entirely or partially contained in the flow, depending on the frequency. Their amplitudes are quantified. In the frequency–wavenumber space, they lie along the GJW dispersion curves predicted using linear-stability analysis. At specific spatial locations, they vary strongly and sharply with the frequency, exhibiting tonal-like peaks near the frequencies of the stationary points in the dispersion curves where the GJWs are standing waves with zero group velocity. Given the flow configuration, these properties can be attributed to propagation effects not requiring axial resonance between upstream- and downstream-travelling waves. Finally, it can be noted that, upstream of the source, outside the jet, the GJW amplitudes fluctuate in a reverse sawtooth manner with very intense peaks up to 30 dB higher than the levels obtained without flow at 10 jet radii from the source, similarly to the GJW footprints in the near-nozzle spectra of high-subsonic jets.