The Formation Law of Surface Profile in Fused Silica During Continuous-Wave CO2 Laser Processing

Although CO₂ laser polishing of fused silica surfaces is considered a promising advanced processing technology, its application remains fundamentally limited by low- to mid-frequency waviness and surface figure errors. To address the critical need for enhanced performance of laser-processed fused silica components, this study investigated the formation law of the surface profile during CO₂ laser processing. Experimental results revealed the formation law governing the influence of processing parameters on surface morphology. A multivariate regression model was established to quantitatively correlate processing parameters with surface profile evolution, enabling prediction of profile errors with less than 5% deviation. Furthermore, an optimization strategy was proposed by introducing an annealing process, which reduced the surface profile error by more than 50% (from 56.94 μm to 23.18 μm). These findings provide both a theoretical basis and process guidance for the low-defect fabrication of fused silica components in high-power laser applications.