Material extrusion additive manufacturing of wood pulp-reinforced epoxy composites
Direct ink writing (DIW) has gained popularity over the last decade, but typically relies on petroleum based materials. This study focuses on the preparation of a wood filled ink that was successfully printed on a large-scale system.
Authors
- Tyler Smith (ORCID: https://orcid.org/0000-0003-1945-7230)
- Katie Copenhaver (ORCID: https://orcid.org/0000-0003-2261-8760)
- Gregory S. Larsen (ORCID: https://orcid.org/0000-0002-7482-1667)
- Madeline Wimmer (ORCID: https://orcid.org/0000-0001-5364-1942)
- Meghan E. Lamm (ORCID: https://orcid.org/0000-0003-3485-4322)
- Brett G. Compton (ORCID: https://orcid.org/0000-0001-5480-474X)
- Halil Tekinalp (ORCID: https://orcid.org/0000-0002-0311-7306)
Institutions
- Oak Ridge National Laboratory (US)
- University of Tennessee at Knoxville (US)
Publication Details
- Journal
- RSC Applied Polymers
- Published
- 2025-11-26
- DOI
- https://doi.org/10.1039/d5lp00325c
- Citations
- 1
- Primary Topic
- Additive Manufacturing and 3D Printing Technologies
- Type
- article
- Field-Weighted Citation Impact
- 0.68
Funders
- U.S. Department of Energy
- Battelle
- UT-Battelle
- Office of Science
- Office of Energy Efficiency and Renewable Energy
- Office of Energy Efficiency
- Oak Ridge National Laboratory