Bone char material for Volatile Organic Compounds (VOCs) adsorption: Effect of the activation on surface characteristics and performance

• A bone char material was prepared by pyrolysis of tuna fish bones. • Activation performed with K 2 CO 3 resulted in a powder with very high surface area. • The powder was very effective for VOCs adsorption especially for o- xylene. • The efficiency was very high also in humid conditions. • The powder could be reused more times with limited decrease in the efficiency. Air pollution is a problem of great concern, with increasing atmospheric concentrations of toxic Volatile Organic Compounds (VOCs) such as BTEX (benzene, toluene, ethylbenzene and o- xylene). We report the development of adsorbant materials derived from tuna fish bones. Tuna Bone Char ( TBC ) was obtained with a pyrolysis process; and activated with K 2 CO 3 treatment (indicated as KTBC, due to the potassium carbonate activation). Characterisation showed that the activation protocol led to a significant increase in the surface area – from 97.45 to 1826.59 m 2 /g for TBC and KTBC ; furthermore, the activated material also showed higher porosity (total pore volume of 2.22 cm 3 /g, micropore volume of 0.38 cm 3 /g). BTEX dynamic adsorption tests showed KTBC excellent adsorption properties, particularly with o -xylene (adsorption capacity q of 147 mg/g). The higher adsorption of o -xylene was explained considering its kinetic diameter matching KTBC pore size dimension. KTBC also showed to be very efficient in humid conditions (q = 61.2 mg/g). Repeated tests with the same powder indicated a 20 % decrease after the first cycle, with no further decrease in additional cycles. Empirical regression models for q 0 and k Th (Thomas model), and τ and K YN (Yoon-Nelson model) were developed for BTEX breakthrough curves and showed agreement with experimental breakcurve data (R 2 > 0.905). These results show that bone char can be used for gaseous pollutants with the activation playing a key role in surface modification and performance enhancement. This research offers a sustainable and effective route to convert marine biowaste into advanced adsorbents for VOC and air pollution control.

Authors

Institutions

Publication Details

Journal
Applied Surface Science
Published
2025-11-26
DOI
https://doi.org/10.1016/j.apsusc.2025.165273
Primary Topic
Adsorption and biosorption for pollutant removal
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Bone char material for Volatile Organic Compounds (VOCs) adsorption: Effect of the activation on surface characteristics and performance

Ettore Guerriero, Massimiliano Frattoni, Clara Piccirillo, Francesca Scalera et al.
Applied Surface Science
Adsorption and biosorption for pollutant removal
article

Bone char material for Volatile Organic Compounds (VOCs) adsorption: Effect of the activation on surface characteristics and performance

Ettore Guerriero, Massimiliano Frattoni, Clara Piccirillo, Francesca Scalera, Robert C. Pullar, Valerio Paolini, Maria Luisa Feo
article en

Abstract

• A bone char material was prepared by pyrolysis of tuna fish bones. • Activation performed with K 2 CO 3 resulted in a powder with very high surface area. • The powder was very effective for VOCs adsorption especially for o- xylene. • The efficiency was very high also in humid conditions. • The powder could be reused more times with limited decrease in the efficiency. Air pollution is a problem of great concern, with increasing atmospheric concentrations of toxic Volatile Organic Compounds (VOCs) such as BTEX (benzene, toluene, ethylbenzene and o- xylene). We report the development of adsorbant materials derived from tuna fish bones. Tuna Bone Char ( TBC ) was obtained with a pyrolysis process; and activated with K 2 CO 3 treatment (indicated as KTBC, due to the potassium carbonate activation). Characterisation showed that the activation protocol led to a significant increase in the surface area – from 97.45 to 1826.59 m 2 /g for TBC and KTBC ; furthermore, the activated material also showed higher porosity (total pore volume of 2.22 cm 3 /g, micropore volume of 0.38 cm 3 /g). BTEX dynamic adsorption tests showed KTBC excellent adsorption properties, particularly with o -xylene (adsorption capacity q of 147 mg/g). The higher adsorption of o -xylene was explained considering its kinetic diameter matching KTBC pore size dimension. KTBC also showed to be very efficient in humid conditions (q = 61.2 mg/g). Repeated tests with the same powder indicated a 20 % decrease after the first cycle, with no further decrease in additional cycles. Empirical regression models for q 0 and k Th (Thomas model), and τ and K YN (Yoon-Nelson model) were developed for BTEX breakthrough curves and showed agreement with experimental breakcurve data (R 2 > 0.905). These results show that bone char can be used for gaseous pollutants with the activation playing a key role in surface modification and performance enhancement. This research offers a sustainable and effective route to convert marine biowaste into advanced adsorbents for VOC and air pollution control.

Applied Surface ScienceVol. 721
Ca' Foscari University of Venice (IT), Istituto di Nanotecnologia (IT), Institute of Atmospheric Pollution Research (IT)
European Commission
Openalex Percentile: Top 67%
Adsorption and biosorption for pollutant removal
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.