Load Transfer along Continuous Collagen Fibers Reduces the Importance of Wall Thickness Variations.

The mechanical response of biological soft tissues is influenced by wall heterogeneity, including spatial variations in wall thickness. Traditional models for homogeneous soft tissues under uniaxial loading predict higher stretch and stress in thinner regions. In fact, large gradients in stretch and stress are predicted to be induced by spatial variations in wall thickness. In prior studies, the role of collagen fibers in regions of thickness transition has been largely neglected or only considered in terms of their effect on anisotropy. Here, we explore the role of collagen fibers as primary load-bearing components across regions of varying wall thickness, using a three-dimensional representative volume element (RVE) model incorporating explicit collagen fiber architecture and a gradual thickness gradient. We examined two distinct collagen fiber configurations across the thickness transition: one featuring abrupt fiber termination and another with fiber continuity. Finite element analysis (FEA) under uniaxial tension revealed that load transfer by continuous fibers across the specimen markedly reduced the importance of the change in wall thickness, with stretch differentials dropping from ~20% (fiber-termination network) to 0.68% (continuous fibers) and stress differentials dropping from ~65% (fiber-termination network) to 2.3% (continuous fibers). Fiber tortuosity delayed the point at which mechanical response was governed by fiber structure. These findings demonstrate the critical role of fiber continuity in reducing stretch and stress gradients across regions of varying wall thickness and clarify the importance of accurately representing fiber architecture when modeling soft tissues with heterogeneous wall thickness.