Experiment and Calibration of Finite Element Parameters of Pineapple Based on Cohesive Zone Model

In view of the lack of research on the extrusion of pineapple caused by the overall stress response of pineapple at the present stage of pineapple automatic harvesting, the finite element model of pineapples can be studied by constructing such a model. At present, there is still a lack of research on the mechanical properties of the pineapple stem. In this research, the mechanical properties of a pineapple stem were determined by a three-point bending test, a compression test, and a theoretical calculation. Based on the cohesive zone model (CZM), the relevant parameters of the pineapple fruit–stem junction were determined by the fracture test. The overall finite element model of pineapple was established, and then the verification test of the finite element model was carried out. In the validation test, the correlation between sample size parameters and results was analyzed, and the validity of the test sample selection was demonstrated. By substituting the simulation results into the derivation formula, the maximum traction strength and maximum displacement error values were calculated to be 4.3% and 2.9%, respectively, which verified the accuracy of the cohesive zone model parameters. By comparing the maximum load force and load displacement of the load point in the test and simulation, the error of the load force at the fracture point relative to the average value was 3.6%, and the error of the load displacement relative to the average value was 1.4%. The numerical results showed that the model reflected the accuracy of the process of pineapple plant fracture. This study provides a reliable finite element model for future research on pineapple automatic harvesting.