Polysaccharides and Polyacrylamide as Linear Polymeric Stabilizers for Zwitterionic Short-Chain Fluorocarbon Surfactant: Interfacial Properties, Apparent Viscosity, and Foam Performance

Polymeric stabilizers play a critical role in enhancing the stability and performance of firefighting foams. This study evaluated the influence of three polymeric stabilizers (xanthan gum, XG; polyacrylamide, PAM; sodium carboxymethyl cellulose, CMC-Na) on the performance of foam solutions formulated with a zwitterionic short-chain fluorocarbon surfactant. The investigation focused on three performances: interfacial properties, apparent viscosity (at a fixed rotational speed), and foam performance, employing interfacial tension analysis, viscosity measurement, dynamic foam analysis, and foam drainage testing. Results indicate that XG and CMC-Na slightly decrease interfacial activities, reducing spreading coefficients 6.34-15.78% and 0.68-6.35%, respectively. However, these polymeric stabilizers substantially increase apparent viscosity through hydrogen bond network formation, which effectively mitigates foam coarsening and drainage. When adding 0.10 wt.% XG, the foam solution exhibits a characteristic coarsening time of 724.64 s and a 25% drainage time of 1519.15 s. Conversely, PAM exhibits a concentration-dependent dual effect. When below 0.06 wt.%, PAM enhances interfacial properties and foam stability. However, at elevated concentrations, excessive PAM aggregates at interfaces and forms entangled networks that inhibit surfactant adsorption. This impairs foam formation and accelerates foam structural evolution, increasing variation in bubble size and promoting foam drainage by 8.63-57.88%. These findings provide crucial reference for applying polymeric stabilizers in short-chain fluorocarbon surfactant systems.