Understanding the Effect of Feedstock Pretreatment on Asphaltene-Derived Carbon Fiber Performance

Abstract Pretreatment is widely reported to improve asphaltene-derived carbon fiber performance, yet its intrinsic effect remains difficult to isolate because prior studies often vary melt-spinning conditions, fiber diameter, and thermal history simultaneously. Here, this ambiguity is resolved through a viscosity-matched melt-spinning protocol in which five asphaltene precursor variants are processed at identical melt viscosities (40–50 Pa·s), producing carbon fibers with statistically indistinguishable diameters of ∼14 μm. Rheometry, TGA-FTIR gas evolution analysis, NMR, FTIR, and GPC show that pretreatment results in measurable changes in precursor composition and molecular characteristics, with particularly pronounced effects on melt rheology and processability. At matched diameters, pretreatment increases average tensile strength from 534 MPa in untreated feedstock to 718 MPa, while Weibull analysis confirms corresponding changes in characteristic strength and tensile failure variability. The 380N pretreatment also enables stable spinning of finer carbon fibers (7.5 μm), yielding an average tensile strength of 1050 MPa, associated with the combined effects of precursor modification and finer fiber production. CHN analysis, XRD, Raman spectroscopy, and SEM-EDS reveal that substantial heteroatom content and structural disorder persist after carbonization, with no decisive pretreatment-induced enhancement in carbon ordering; correspondingly, tensile modulus remains within 48–54 GPa. Residual maltenes are further identified as an important source of interstudy variability through their effects on rheology and stabilization behavior. These findings establish pretreatment as a processability-driven route for improving asphaltene-derived carbon fibers, rather than a direct pathway to substantial structural development.

Authors

Institutions

Publication Details

Journal
Energy & Fuels
Published
2026-11-17
DOI
https://doi.org/10.1021/acs.energyfuels.6c03265
Primary Topic
Fiber-reinforced polymer composites
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Understanding the Effect of Feedstock Pretreatment on Asphaltene-Derived Carbon Fiber Performance

Yanbo Li, Muzaffer Ahmet Karaaslan, Yasmine Abdin, Scott H. Renneckar et al.
1 links
Energy & Fuels
Fiber-reinforced polymer composites
article

Understanding the Effect of Feedstock Pretreatment on Asphaltene-Derived Carbon Fiber Performance

Yanbo Li, Muzaffer Ahmet Karaaslan, Yasmine Abdin, Scott H. Renneckar, Yeo Jin Kim, Milan Kondzulovic, Spencer Nigoghossian-Graves
article en

Abstract

Abstract Pretreatment is widely reported to improve asphaltene-derived carbon fiber performance, yet its intrinsic effect remains difficult to isolate because prior studies often vary melt-spinning conditions, fiber diameter, and thermal history simultaneously. Here, this ambiguity is resolved through a viscosity-matched melt-spinning protocol in which five asphaltene precursor variants are processed at identical melt viscosities (40–50 Pa·s), producing carbon fibers with statistically indistinguishable diameters of ∼14 μm. Rheometry, TGA-FTIR gas evolution analysis, NMR, FTIR, and GPC show that pretreatment results in measurable changes in precursor composition and molecular characteristics, with particularly pronounced effects on melt rheology and processability. At matched diameters, pretreatment increases average tensile strength from 534 MPa in untreated feedstock to 718 MPa, while Weibull analysis confirms corresponding changes in characteristic strength and tensile failure variability. The 380N pretreatment also enables stable spinning of finer carbon fibers (7.5 μm), yielding an average tensile strength of 1050 MPa, associated with the combined effects of precursor modification and finer fiber production. CHN analysis, XRD, Raman spectroscopy, and SEM-EDS reveal that substantial heteroatom content and structural disorder persist after carbonization, with no decisive pretreatment-induced enhancement in carbon ordering; correspondingly, tensile modulus remains within 48–54 GPa. Residual maltenes are further identified as an important source of interstudy variability through their effects on rheology and stabilization behavior. These findings establish pretreatment as a processability-driven route for improving asphaltene-derived carbon fibers, rather than a direct pathway to substantial structural development.

Energy & Fuels
University of British Columbia (CA)
Emissions Reduction Alberta, Government of Canada, Canada Foundation for Innovation, Alberta Innovates
Fiber-reinforced polymer composites
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon