Issue of Selecting Stress Field Parameters for the Analysis of Mining Excavation Stability Using Numerical Methods in the Conditions of the LGCB Mines

This paper concerns the issue of selecting appropriate stress field parameters for predicting the stability of headings driven under the geological and mining conditions of Polish underground copper mines. The problem is of key importance due to strict safety requirements in mine workings that serve ventilation and transport functions. Numerical analyses were carried out for four stress field variants: the stress state determined based on Bulin’s formulas (variant 1), the hydrostatic stress state (variant 2), and stress states determined from in situ measurements conducted in the Rudna mine (variant 3 and variant 4). Numerical simulations were performed for a group of four headings, supported with fully grouted rock bolts, in the geological and mining conditions of the Rudna mine. Stability assessment was performed using the finite element method (FEM). Rock mass input parameters for the modeling were obtained with RocLab 1.0, applying the Hoek–Brown classification, while numerical analyses employed the Mohr–Coulomb failure criterion. The elastic–plastic model with softening was used to describe the rock mass behaviour. Numerical calculations were conducted in the RS2 computer program in a triaxial stress state and in a plane strain state. The range of the yielded rock mass zone in the roof of the headings was assumed as the optimal measure of the headings stability. The obtained simulation results provided a basis for recommending suitable rock bolting systems to protect the stability of headings developed under various initial stress field conditions.