Study on Combustion Characteristics of Compression Ignition Marine Methanol/Diesel Dual-Fuel Engine

With the increasing global demand for environmental protection and sustainable energy utilization, methanol, as a clean and renewable fuel, has become a research focus in the field of marine engines. However, its application in compression ignition engines faces bottlenecks such as low combustion efficiency and poor stability. Taking the L23/30H marine diesel engine as the research object, this paper establishes a combustion simulation model for a methanol/diesel dual-fuel direct-injection engine. The reliability of the model is ensured through grid independence verification and model calibration, and a coupled chemical reaction kinetic mechanism containing 126 species and 711 elementary reactions is constructed. A systematic study is conducted on the effects of injection strategies, including fuel operating modes, spray development patterns, injection intervals, and injection timing, on combustion characteristics. The results show that under the optimized injection strategy (vertical cross spray + synchronous injection) proposed in this study and operating conditions with a high methanol substitution ratio, the combustion efficiency, dynamic performance, and soot emission control effect of the dual-fuel mode are superior to those of the pure diesel mode. Simulation results show that the combined strategy of vertical cross injection and synchronous injection can significantly increase the indicated thermal efficiency (ITE) by 3.2%, reduce the brake specific fuel consumption (BSFC) by approximately 4.5%, advance the peak heat release by 2 °CA, and remarkably improve the combustion efficiency, while earlier injection timing is beneficial to air–fuel mixing. Further comparison of combustion and emission characteristics under different boundary conditions such as methanol energy ratios and injection pressures reveals that increasing methanol injection pressure, compression ratio, and initial pressure can improve combustion uniformity and reduce soot emissions, but NOx emissions increase, which requires the coordination of after-treatment technologies. Through the comprehensive optimization of multiple parameters, efficient and clean combustion under a high methanol substitution rate is achieved. This paper provides theoretical support and practical guidance for the technological development of marine methanol dual-fuel engines. In the future, industrial applications can be promoted by combining actual engine tests and after-treatment technologies.