Quantifying Thermal Time Lag Due to PCM Plaster in Model Houses

Phase change materials (PCMs) integrated into building envelopes can store and release latent heat, reducing indoor temperature fluctuations and shifting thermal peaks. This study quantifies the time lag and comfort impact of PCM plaster under free-running conditions using two identical, instrumented model houses in Bácsalmás, Hungary. One house served as a reference, while the other was retrofitted with interior PCM plaster panels on four walls (51.2 kg paraffin, ≈8.12 MJ latent heat capacity). The temperatures of the walls, indoor air, and outdoor environment were monitored every five minutes for 105 spring/summer days. Daily peak times were extracted using moving-average smoothing, and time lags between exterior and interior wall peaks were computed. The PCM house exhibited roughly double the average lag compared with the reference (≈200 vs. ≈100 min), with lag distributions well described by lognormal fits. Comfort evaluation based on exceeded degree-hours (EDH) relative to the adaptive comfort range (EN 16798-1) revealed that larger peak-time lags correlated with lower overheating. Results confirm that PCM plaster significantly delays and attenuates daily temperature peaks, extends comfort periods, and supports passive strategies such as night ventilation and demand-side load shifting in lightweight buildings.