Protective TiOxNy -based multilayer coatings for 316L stainless steel bipolar plates in a PEM water electrolyzer

The present work reports the optimization of magnetron-sputtered titanium/titanium oxynitride thin-film coatings for application on 316L stainless steel bipolar plates (BPP) in proton exchange membrane water electrolyzers (PEMWE). As it will be shown, these coatings display tunable electrical conductivity and mechanical hardness to optimize the interfacial contact resistance (ICR). By controlling the elemental composition and thickness of the coating, and by using multilayers instead of single TiON layers, the ICR can be reduced to 1.5 mΩ cm 2 , a value lower than the targeted ICR (10 mΩ cm 2 ) for BPP in PEMWE. Moreover, due to its stable oxide nature, in contrast to uncoated steel, the coated steel was undamaged after 168 h at 60 °C under the experimental conditions found in PEMWE, in which the BPP surface potential is decoupled from the cell voltage. This proposed low-cost coating should therefore be considered as a promising material to enhance the competitiveness of the PEMWE technology. • Novel thin titanium oxynitride (TiO x N y )-based coatings were deposited on 316L stainless steel substrates. • TiO x N y /Ti/TiO x N y multilayer coatings improve the interfacial contact resistance with respect to single TiO x N y layers. • Coated SS316L exhibits stability and no sign of metal leaching after 168 h under BPP-like conditions.

Authors

Institutions

Publication Details

Journal
International Journal of Hydrogen Energy
Published
2025-09-24
DOI
https://doi.org/10.1016/j.ijhydene.2025.151650
Citations
1
Primary Topic
Hybrid Renewable Energy Systems
Type
article
Field-Weighted Citation Impact
0.53
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Protective TiOxNy -based multilayer coatings for 316L stainless steel bipolar plates in a PEM water electrolyzer

Valérie Demange, Stéphane Rioual, Michel Prestat, Simon Ollivier et al.
1 citations
International Journal of Hydrogen Energy
Hybrid Renewable Energy Systems
0.53
article

Protective TiOxNy -based multilayer coatings for 316L stainless steel bipolar plates in a PEM water electrolyzer

Valérie Demange, Stéphane Rioual, Michel Prestat, Simon Ollivier, Geoffrey Ringot, Benoît Lescop, Gaël Maranzana, Michael Walls, Loïc Joanny, Flavien Vucko, Françis Gouttefangeas, Ludivine Rault, Loïc Assaud, Khaoula Chergui, Salvador Divino
article en
1 citations

Abstract

The present work reports the optimization of magnetron-sputtered titanium/titanium oxynitride thin-film coatings for application on 316L stainless steel bipolar plates (BPP) in proton exchange membrane water electrolyzers (PEMWE). As it will be shown, these coatings display tunable electrical conductivity and mechanical hardness to optimize the interfacial contact resistance (ICR). By controlling the elemental composition and thickness of the coating, and by using multilayers instead of single TiON layers, the ICR can be reduced to 1.5 mΩ cm 2 , a value lower than the targeted ICR (10 mΩ cm 2 ) for BPP in PEMWE. Moreover, due to its stable oxide nature, in contrast to uncoated steel, the coated steel was undamaged after 168 h at 60 °C under the experimental conditions found in PEMWE, in which the BPP surface potential is decoupled from the cell voltage. This proposed low-cost coating should therefore be considered as a promising material to enhance the competitiveness of the PEMWE technology. • Novel thin titanium oxynitride (TiO x N y )-based coatings were deposited on 316L stainless steel substrates. • TiO x N y /Ti/TiO x N y multilayer coatings improve the interfacial contact resistance with respect to single TiO x N y layers. • Coated SS316L exhibits stability and no sign of metal leaching after 168 h under BPP-like conditions.

International Journal of Hydrogen EnergyVol. 178
Centre National de la Recherche Scientifique (FR), Université de Bretagne Occidentale (FR), Université Paris-Saclay (FR), Laboratoire de physique des Solides (FR), CEA Paris-Saclay - Etablissement de Saclay (FR), Université Rennes 2 (FR), Institut des Sciences Chimiques de Rennes (FR), French Corrosion Institute (FR), Laboratoire Énergies et Mécanique Théorique et Appliquée (FR), Laboratoire des Sciences et Techniques de l’Information de la Communication et de la Connaissance (FR), Institut de Chimie Moléculaire et des Matériaux d'Orsay (FR), Université de Rennes (FR), Université de Lorraine (FR), ESPCI Paris (FR)
Openalex Percentile: Top 24%
Hybrid Renewable Energy Systems
0.53
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.