An Enhanced Grid-Forming Control Strategy for Suppressing Magnetizing Inrush Current During Black Start of Wind-Storage Systems

Grid-forming wind-storage systems can serve as black-start power sources capable of autonomously establishing voltage and frequency references when the external grid is unavailable, thereby providing crucial support for rapid grid restoration. However, during the black-start process, energizing unloaded transformers often induces severe magnetizing inrush currents, which may cause transient overcurrent, damage grid-forming converters, and compromise system stability. To address this issue, this paper proposes a segmented zero-voltage start strategy and a dual-side converter multi-mode switching control scheme based on small-capacity distributed energy storage. First, the formation mechanism of transformer magnetizing inrush under no-load energization is analyzed. A segmented zero-voltage start module is embedded into the outer voltage loop of the virtual synchronous generator (VSG) controller to enable a smooth rise in output voltage, effectively mitigating transient impacts caused by magnetic core saturation. Second, considering the operating requirements during self-start and load restoration stages, a coordinated control framework for dual-side converters is designed to achieve dynamic voltage, frequency, and power regulation with limited energy storage capacity, thereby improving transient stability and energy utilization efficiency. Finally, real-time hardware-in-the-loop (HIL) simulations conducted on an RT-LAB platform verify the feasibility of the proposed control strategy. The results demonstrate that the method can significantly suppress magnetizing inrush current, transient overvoltage, and overcurrent, thus enhancing the success rate and dynamic stability of black-start operations in grid-forming wind-storage systems.