Wood Biomass Ash (WBA) Used in Conjunction with Post-Fermentation Mass (PFM) as a Way to Stabilize Soil Properties

Nowadays, waste that can be used for environmental purposes, such as WBA (woody biomass ash), is particularly important. The presented research assessed the effect of soil application of WBA in conjunction with PFM (post-fermentation mass) on the stabilization of soil properties. WBA was applied in three increasing doses (0.5, 1.0, and 1.5 HAC). PFM was applied as follows: ULF (unseparated liquid fraction), SSF (separated solid fraction), and SLF (separated liquid fraction). PFM doses were balanced with the amount of nitrogen introduced into the soil. The study was based on a pot experiment with maize. The applied doses of WBA had a highly significant and positive effect on the stabilization of basic soil properties. After WBA application, hydrolytic acidity decreased (by 30%), soil pH increased (by 1.83 units), total base cation increased (by 66%), available potassium (by 119%), phosphorus (by 44%), and magnesium content (by 38%) as well as electrolytic conductivity increased (by 11%). Furthermore, an increase in soil carbon content and an improvement in the carbon-to-nitrogen ratio were noted. These observed results were further enhanced by the simultaneous application of WBA and the used PFM fractions, of which the liquid fractions (ULF and SLF) had the strongest effect.