Resulted Mechanical and Microstructural Properties of Ballistic Protection Materials for Bulletproof Vest Applications Using Plasma Jet Thermal Spray Coatings

This paper addresses ballistic protection, which is an important element in the performance of any military equipment. Improving ballistic properties is a necessity for individual protection through the use of protective vests. In this study, plasma jet thermal deposition was performed on ballistic protection materials, steel plates from the ARMOX category, using both metallic and ceramic powders. The samples with appropriate dimensions, covered with these types of powders, were analyzed from a microstructural point of view to determine their mechanical properties and evaluate the improvement in ballistic protection level. Microstructural analyses by optical and electronic microscopy, SEM (Scanning Electron Microscopy), allowed the performance of complex analyses regarding the adhesion of the deposits to the base material. It was possible to evaluate the microstructure, thickness, uniformity, and porosity of the deposits and the microstructural aspects at the interface between the base material and the deposit. For the efficient use of these deposits, tribological studies were carried out on the mechanical properties through scratch and microindentation analyses. The paper concludes the results obtained for the two types of deposits, metallic and ceramic, to streamline their use to increase the ballistic protection of bulletproof vests used in individual protection in military equipment.