High-Efficiency Terahertz Generation Using a Photoconductive Antenna with Vertically Distributed Ring-Disc Electrodes

Current photoconductive antennas (PCAs) fail to maximize the use of photogenerated carriers at the electrode edges. To address this limitation, we designed a novel PCA structure featuring a ring electrode and a disc electrode. The positive and negative electrodes are positioned on opposite sides of the substrate, and eight metal tips are incorporated into the ring electrode to enhance performance. The PCA-1 photoconductive antenna with both positive and negative electrodes on the same side of the substrate generates a peak current of about 18 μA, whereas under the same simulation parameters, the peak current generated by the PCA-1 and the conventional interdigitated photoconductive antenna are equal, and the PCA-2 photoconductive antenna with positive and negative electrodes on the top and bottom sides of the substrate generates a current nearly 1.45 times higher than that generated by the PCA-1. The PCA-3 photoconductive antenna with positive and negative electrodes on the top and bottom of the substrate and eight additional metal tips on the circular electrodes is nearly twice the peak current generated by the PCA-1, and the terahertz radiated power of the designed PCA-3 is four times that of the PCA-1, which suggests that the designed THz-PCA can improve the optical-terahertz conversion efficiency, and it has a great prospect of popularizing terahertz technology based on the THz-PCA.